Sensor Request - Help: Sensirion SEN55/5x - Particle and VOC/NOX

[tyeth]

PROBLEM DESCRIPTION

I wish to use the Sensirion SEN5x series of sensors, ideally the SEN55 which includes the NOx sensor in addition to VOC and PPM. (Sen54 = PPM+VOC, SEN50=PPM)
Product page contains links to info and code, as does sensirions github repo.
https://sensirion.com/products/catalog/SEN55/

I bought mine from a UK supplier for £20, without a JST-GHR 6-Pin cable, which meant a separate shipment but saved a fair bit of money as combined units were £50 elsewhere.
https://www.anglia-live.com/product/2080075001/SEN55-SDN-T/SENSIRION-AG

I'd like to attempt to add it, but need help understanding if it is acceptable to add a dependency on Sensirions driver?

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): T-DisplayS3 and maybe sonoffs in future
• Tasmota binary firmware version number used: n/a
  • Pre-compiled
  • Self-compiled
• Flashing tools used: web
• Provide the output of command: Backlog Template; Module; GPIO 255: ping pong

  Configuration output here:
n/a

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:
n/a

• Provide the output of this command: Status 0:

  STATUS 0 output here:
ping pong

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:
ping pong

TO REPRODUCE

No steps required

EXPECTED BEHAVIOUR

Magically works

SCREENSHOTS

n/a

ADDITIONAL CONTEXT

I'm volunteering with the proviso I need a little help.
I found the initial request as a discussion after fully processing the issue requirements:
#15463

(Please, remember to close the issue when the problem has been addressed)

[Jason2866]

Please do not open an issue for a Feature Request or a duplicate discussion.
Discussed further in #15463