Creality Ender-3 S1 Plus / Pro printers example configurations

config/default/Configuration.h

@@ -3130,6 +3130,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3139,7 +3143,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/default/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -3156,6 +3156,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3165,7 +3169,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -3131,6 +3131,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3140,7 +3144,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -3131,6 +3131,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3140,7 +3144,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -3209,6 +3209,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3218,7 +3222,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -2037,6 +2037,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/Alfawise/U20/Configuration.h

@@ -3210,6 +3210,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3219,7 +3223,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/Alfawise/U20/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/AliExpress/CL-260/Configuration.h

@@ -3130,6 +3130,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3139,7 +3143,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -3131,6 +3131,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3140,7 +3144,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/Anet/A2/Configuration.h

@@ -3132,6 +3132,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3141,7 +3145,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)

config/examples/Anet/A2/Configuration_adv.h

@@ -2028,6 +2028,22 @@
       #define DGUS_UI_WAITING_STATUS 10
       #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
     #endif
+
+  #elif DGUS_UI_IS(E3S1PRO)
+    /**
+     * The stock Ender-3 S1 Pro/Plus display firmware has rather poor SD file handling.
+     *
+     * The autoscroll is mainly useful for status messages, filenames, and the "About" page.
+     *
+     * NOTE: The Advanced SD Card option is affected by the stock touchscreen firmware, so
+     *       pages 5 and up will display "4/4". This may get fixed in a screen firmware update.
+     */
+    #define DGUS_SOFTWARE_AUTOSCROLL        // Enable long text software auto-scroll
+    #define DGUS_AUTOSCROLL_START_CYCLES 1  // Refresh cycles without scrolling at the beginning of text strings
+    #define DGUS_AUTOSCROLL_END_CYCLES 1    // ... at the end of text strings
+
+    #define DGUS_ADVANCED_SDCARD            // Allow more than 20 files and navigating directories
+    #define DGUS_USERCONFIRM                // Reuse the SD Card page to show various messages
   #endif
 #endif // HAS_DGUS_LCD
 

config/examples/Anet/A2plus/Configuration.h

@@ -3132,6 +3132,10 @@
  *  - Download https://github.com/InsanityAutomation/Marlin/raw/CrealityDwin_2.0/TM3D_Combined480272_Landscape_V7.7z
  *  - Copy the downloaded DWIN_SET folder to the SD card.
  *
+ * E3S1PRO (T5UID1)
+ *  - Download https://github.com/CrealityOfficial/Ender-3S1/archive/3S1_Plus_Screen.zip
+ *  - Copy the downloaded DWIN_SET folder to the SD card.
+ *
  * CREALITY_TOUCH
  *  - CR-6 OEM touch screen. A DWIN display with touch.
  *
@@ -3141,7 +3145,7 @@
  *  - Plug the microSD card into the back of the display.
  *  - Boot the display and wait for the update to complete.
  *
- * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY' ]
+ * :[ 'ORIGIN', 'FYSETC', 'HYPRECY', 'MKS', 'RELOADED', 'IA_CREALITY', 'E3S1PRO', 'CREALITY_TOUCH' ]
  */
 //#define DGUS_LCD_UI ORIGIN
 #if DGUS_UI_IS(MKS)