BIQU BX Updates#26871
Merged
sjasonsmith merged 4 commits intoMarlinFirmware:bugfix-2.1.xfrom Apr 7, 2024
Merged
Conversation
Users can add #define BX_SWAP_ZM_E1M to their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory.
WIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT*, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality.
Use a sanity check so it's clear which options are valid for TFT_TOUCH_DEVICE_GT911 / BIQU_BX_TFT70.
thisiskeithb
force-pushed
the
pr/BIQU_BX_updates
branch
from
f4c2762 to
ab742a7
Compare
sjasonsmith
reviewed
Apr 7, 2024
sjasonsmith
reviewed
Apr 7, 2024
RPGFabi
pushed a commit
to RPGFabi/Marlin
that referenced
this pull request
Jun 15, 2024
* Add a swap Z & E1 option for BIQU BX Users can add #define BX_SWAP_ZM_E1M to their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory. * Add BOARD URL, DIAG pin info, update pin comments * Add WIFISUPPORT defines for documentation purposes WIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT*, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality. * Sanity check TOUCH_SCREEN_CALIBRATION on GT911 TFTs (BIQU BX TFT70) Use a sanity check so it's clear which options are valid for TFT_TOUCH_DEVICE_GT911 / BIQU_BX_TFT70.
EvilGremlin
pushed a commit
to EvilGremlin/Marlin
that referenced
this pull request
May 15, 2025
* Add a swap Z & E1 option for BIQU BX Users can add #define BX_SWAP_ZM_E1M to their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory. * Add BOARD URL, DIAG pin info, update pin comments * Add WIFISUPPORT defines for documentation purposes WIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT*, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality. * Sanity check TOUCH_SCREEN_CALIBRATION on GT911 TFTs (BIQU BX TFT70) Use a sanity check so it's clear which options are valid for TFT_TOUCH_DEVICE_GT911 / BIQU_BX_TFT70.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Description
Users can add
#define BX_SWAP_ZM_E1Mto their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory....self-explanatory
WIFISUPPORTdefines for documentation purposesWIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT*, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality.
TOUCH_SCREEN_CALIBRATIONon GT911 TFTs (BIQU BX TFT70)Use a sanity check so it's clear which options are valid for
TFT_TOUCH_DEVICE_GT911/BIQU_BX_TFT70.Requirements
BIQU BX
Configurations
Default BIQU BX config