Analogizer R2 and R3 adapters
This design Includes support for SOG (SYNC ON GREEN), includes a switch to activate/deactivate this function:
You must enable RGsB or YPbPr output in the core menu adapted to use Analogizer:
Allows you to connect the adapter to a CRT or other type of TV that has a component video input (see photo):
And you can use a cable like this (VGA to component video):
.
- New case design with two tab options (for Pocket without tempered glass screen protector or for Pocket with tempered glass screen protector).
For output Y/C and composite video you need to select in Pocket's Menu: Analogizer Video Out > Y/C NTSC or Analogizer Video Out > Y/C NTSC,Pocket OFF. You can tune the phase accumulator
with Chroma Add and Chroma Multiply sliders adjusting values between 0 and 31. Normally it is not necessary to modify the value of these settings.
For output Scandoubler SVGA video you need to select in Pocket's Menu: Analogizer Video Out > Scandoubler RGBHV.
You will need to connect an active VGA to Y/C adapter to the VGA port (the 5V power is provided by VGA pin 9). I'll recomend one of these (active):
- MiSTerAddons - Active Y/C Adapter
- MikeS11 Active VGA to Composite / S-Video
- Active VGA->Composite/S-Video adapter
Using another type of Y/C adapter not tested to be used with Analogizer will not receive official support.
Externally this version has no changes, it is really a revision of the PCB that has improved routing for the digital signals going to the video DAC. This is not really appreciated unless the video signal uses a resolution per color channel of 6 bits.