Parse WebQuery responce using rules on ESP8266

[Bebuccio]

I have compiled a new bin (rev. 14.6.0) using the "#define USE_WEBSEND_RESPONSE".
I want that the device with this version of firmware would be able to perform WebQuery GET to another Tasmota device (the IP is 192.168.20.207) getting it's status (i.e. the status of the Switch1) and performes some actions (i.e. setting the Var4 with the status of switch1 of the other device).

This is the rule on my device:
rule2 ON WebQuery#StatusSNS#Switch1 Var4 %value% ENDON
rule2 1

Then on this device I send this command:
WebQuery http://192.168.20.207/cm?cmnd=Status%208 GET

The device at ip 192.168.20.207 respond correctly and on my device I see:

13:05:44.630 CMD: WebQuery http://192.168.20.207/cm?cmnd=Status%208 GET
13:05:44.631 SRC: WebConsole from 192.168.20.100
13:05:44.633 CMD: Grp 0, Cmd 'WEBQUERY', Idx 1, Len 44, Pld -99, Data 'http://192.168.20.207/cm?cmnd=Status%208 GET'
13:05:44.974 RSL: RESULT = {"WebQuery":{"StatusSNS":{"Time":"2025-05-28T13:05:44","Switch1":"ON","Switch2":"OFF"}}}

The problem is that the rule2 (ON WebQuery#StatusSNS#Switch1) is not triggered.

Where is the problem?

[sfromis]

Doing a similar test, I had no trouble making it work. Of course, I made sure to use a valid rule, instead of your syntax error of missing the do keyword.

[Bebuccio]

Thanks. I have missed the kye "DO" inside the rule. Sorry