ceph · idryomov · Nov 26, 2013 · Nov 26, 2013 · Nov 26, 2013 · Nov 26, 2013
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -18,6 +18,28 @@ Removal of a device:
 
   $ echo <dev-id> > /sys/bus/rbd/remove
 
+What:		/sys/bus/rbd/add_single_major
+Date:		December 2013
+KernelVersion:	3.14
+Contact:	Sage Weil <sage@inktank.com>
+Description:	Available only if rbd module is inserted with single_major
+		parameter set to true.
+		Usage is the same as for /sys/bus/rbd/add.  If present,
+		should be used instead of the latter: any attempts to use
+		/sys/bus/rbd/add if /sys/bus/rbd/add_single_major is
+		available will fail for backwards compatibility reasons.
+
+What:		/sys/bus/rbd/remove_single_major
+Date:		December 2013
+KernelVersion:	3.14
+Contact:	Sage Weil <sage@inktank.com>
+Description:	Available only if rbd module is inserted with single_major
+		parameter set to true.
+		Usage is the same as for /sys/bus/rbd/remove.  If present,
+		should be used instead of the latter: any attempts to use
+		/sys/bus/rbd/remove if /sys/bus/rbd/remove_single_major is
+		available will fail for backwards compatibility reasons.
+
 Entries under /sys/bus/rbd/devices/<dev-id>/
 --------------------------------------------
 
@@ -33,6 +55,10 @@ major
 
 	The block device major number.
 
+minor
+
+	The block device minor number.  (December 2013, since 3.14.)
+
 name
 
 	The name of the rbd image.

diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {

diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"

diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;

diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 

diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.

diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -5,56 +5,70 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
 	gpio1: gpio-controller@c00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,7 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
 
 Example:
 
@@ -25,4 +26,5 @@ ethernet@83fec000 {
 	phy-mode = "mii";
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
+	phy-supply = <&reg_fec_supply>;
 };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -32,12 +32,14 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt	Global Mixed-mode Technology, Inc.
 hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.

diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX
@@ -0,0 +1,14 @@
+00-INDEX
+	- This file
+gpio.txt
+	- Introduction to GPIOs and their kernel interfaces
+consumer.txt
+	- How to obtain and use GPIOs in a driver
+driver.txt
+	- How to write a GPIO driver
+board.txt
+	- How to assign GPIOs to a consumer device and a function
+sysfs.txt
+	- Information about the GPIO sysfs interface
+gpio-legacy.txt
+	- Historical documentation of the deprecated GPIO integer interface
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1934,7 +1934,8 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@fusionio.com>
+M:	Chris Mason <clm@fb.com>
+M:	Josef Bacik <jbacik@fb.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -4049,6 +4050,12 @@ W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
+HSR NETWORK PROTOCOL
+M:	Arvid Brodin <arvid.brodin@alten.se>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/hsr/
+
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
@@ -5261,7 +5268,7 @@ S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
 F:	include/linux/lockdep.h
-F:	kernel/lockdep*
+F:	kernel/locking/
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
 M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
@@ -5973,10 +5980,10 @@ F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <Trond.Myklebust@netapp.com>
+M:	Trond Myklebust <trond.myklebust@primarydata.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
-T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T:	git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
 S:	Maintained
 F:	fs/lockd/
 F:	fs/nfs/
@@ -6243,8 +6250,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <rob.herring@calxeda.com>
 M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
-M:	Stephen Warren <swarren@wwwdotorg.org>
 M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
+M:	Kumar Gala <galak@codeaurora.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/
@@ -7385,7 +7392,6 @@ S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
-F:	kernel/wait.c
 F:	include/linux/wait.h
 
 SCORE ARCHITECTURE

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*