How to disable zaxis??

[artayasa]

Hiw to disable Zaxis sir, i want to used for my cnc laser co2, so only need 2 acis X and Y only. Whreis to defind the Z axis? Thank you. Because i used webdownloader canot see the balackpill with generic output, only blackpill output. I need generic because i have board already with generic output. Thank you.

[terjeio]

The Z-axis pins are controlled by code in driver.c and defined in the board map located in the boards directory . XYZ-pins are always defined and you have to edit driver.c and the board map if you want to free up the pins.

I have not yet added generic boards to the Web Builder, which processor, and which crystal frequency, does your board have?

[artayasa]

The Z-axis pins are controlled by code in driver.c and defined in the board map located in the boards directory . XYZ-pins are always defined and you have to edit driver.c and the board map if you want to free up the pins.

I have not yet added generic boards to the Web Builder, which processor, and which crystal frequency, does your board have?

Thanks mate, my stm32 is stm32f401ccu6. Crystal is 25mhz i have tested with stm32 blackpill its work, but the pinout is deferent with my shield sir. I try to buld by mayshelft 2 days already still cant, even using platfom io or ide ( iam still learn about stm32, hope u can make it for me🙏) thank you
I just need X step on A0, Y step A1,,, Xdir A4, YdirA5, and cooland flood on B4 sir, only thats pin i used for my laser, because A8 still as a pwm spindle/laser.

Or posible to set 0 for step/mm, accel for Z axis only, sir?? So thats means disable?? Because when i turn on homing the first run is Z axis.
Now i already can compile, and build. I disable for input, e stop, feedholdand other by comment this.
//#define CONTROL_ENABLE (CONTROL_HALT|CONTROL_FEED_HOLD|CONTROL_CYCLE_START) on line 143 in driver.h.
I dont know its a true way or no😁 bit its working. Now only Z axis. Thank you

[terjeio]

Disable Z-axis homing by setting $44=0.

[artayasa]

Disable Z-axis homing by setting $44=0.

Okee mate i will try. Thank you