💻🔋 macpow – Real-time power tree TUI for Apple Silicon

Real-time power consumption monitor for Apple Silicon Macs (M1–M5+).

macpow reads directly from macOS hardware interfaces — IOReport, SMC, IORegistry, CoreAudio, and Mach/kernel APIs — to show per-component power draw, temperatures, frequencies, CPU utilization, and per-process energy attribution. No sudo required.

Features

• SoC breakdown — CPU (E/P cores with per-core power, utilization bars, temperatures), GPU, ANE, DRAM, GPU SRAM, Media Engine, Camera (ISP), Fabric — all from IOReport Energy Model
• CPU utilization — per-core usage % with visual bars from Mach host_processor_info
• Real frequencies — CPU and GPU MHz from DVFS voltage-states tables, not percentages
• Temperatures — per-component and per-core from SMC sensors (CPU, GPU, ANE, DRAM, SSD, Battery); adaptive key mapping for M1–M3 (Tp0*) and M4+ (Tex*/Tp1*/Tp2*)
• Memory — used/total GB via host_statistics64 Mach API
• Display — brightness estimate + IOReport SoC display controller; external display power via IOReport DISPEXT
• Keyboard — backlight brightness and estimated power via IORegistry PWM
• Battery — voltage, amperage, charge %, time remaining, temperature, drain/charge rate
• SSD — model, interconnect (Apple Fabric/PCIe), power estimation from IORegistry disk counters
• Peripherals — Thunderbolt/PCIe (IOReport measured), Ethernet (link speed, per-interface traffic), WiFi (signal/mode/channel, per-interface traffic), Bluetooth devices with battery levels, USB devices (speed/power/I/O counters)
• Per-process energy — dynamically-sized top processes by session energy (from proc_pid_rusage), with per-process disk I/O rates, network traffic (via nettop), RAM footprint, dead process detection
• Fans — RPM and cubic power model per fan
• Collapsible tree — fold/unfold with arrows, +/- for all
• Sparkline charts — pin any resource with Space, inline 1-line history column at wide terminals
• Time-based SMA — toggle 0s/5s/10s smoothing window
• Latency control — toggle UI refresh rate: 500ms / 2s / 5s
• Mouse support — click to select rows
• JSON mode — pipe structured data for scripts and dashboards
• No sudo — runs entirely with user-level permissions

Install

With cargo

cargo install macpow

From source

git clone https://github.com/k06a/macpow.git
cd macpow
cargo build --release
./target/release/macpow

Homebrew

brew tap k06a/tap
brew install macpow

Usage

macpow                    # TUI mode (default)
macpow --json             # JSON output to stdout
macpow --interval 500     # Set sampling interval in ms (default: 250)
macpow --dump             # Dump IOReport channel names (diagnostics)

Keybindings

Key	Action
q / Esc	Quit
Up / Down / j / k	Move cursor
Left / Right / h	Collapse / expand tree node
+ / =	Expand all nodes
-	Collapse all nodes
Space	Pin/unpin resource chart
a	Cycle SMA window: 0s / 5s / 10s
l	Cycle refresh interval: 250ms / 500ms / 1s / 2s
r	Reset all totals and min/max
PgUp / PgDn	Scroll by 10 rows
Home	Jump to top
Mouse click	Select row

All letter keys work on any keyboard layout (QWERTY, Russian, Dvorak, etc).

Architecture

Each data source runs in its own thread, updating shared metrics at its own pace. The TUI renders at the configured interval without blocking on slow sources.

+------------------+---------------------------------------------+
| Data source      | What it provides                            |
+------------------+---------------------------------------------+
| IOReport         | SoC power (Energy Model),                   |
|                  | CPU/GPU frequencies (DVFS residency)        |
| SMC              | System power (PSTR), display backlight     |
|                  | (PDBR), adapter (PDTR), WiFi (wiPm),      |
|                  | temps, fans                                |
| IORegistry       | Battery, display brightness, keyboard PWM,  |
|                  | USB devices, SSD model, disk I/O counters   |
| CoreAudio        | Volume level, mute state                    |
| Mach API         | Per-CPU utilization ticks, memory stats      |
| proc_pid_rusage  | Per-process billed energy                   |
| getifaddrs       | Network traffic byte counters               |
| CoreWLAN/pmset   | WiFi info, Bluetooth devices                |
| IOPMAssertions   | Power assertions, audio playback detection  |
+------------------+---------------------------------------------+

Power measurements vs estimates

Component	Source	Method
CPU, GPU, ANE, DRAM	IOReport	Direct energy measurement (mJ/uJ/nJ deltas)
Media Engine, Camera (ISP)	IOReport	Direct energy measurement (AVE + MSR, ISP)
Fabric (AMCC, DCS, FAB, AFR)	IOReport	Direct energy measurement
Thunderbolt/PCIe	IOReport	Direct energy measurement (PCIe ports + controllers)
Display backlight	SMC PDBR	Direct power rail measurement
Display controller	IOReport DISP/DISPEXT	Direct energy measurement (SoC + external)
Power adapter	SMC PDTR	Direct power delivery measurement
System total	SMC PSTR	Direct power rail measurement
Battery	IORegistry	V * I calculation
Per-process	Kernel	ri_billed_energy from rusage_info_v4
Per-process disk I/O	Kernel	ri_diskio_bytesread/written from rusage_info_v4
Per-process memory	Kernel	ri_phys_footprint from rusage_info_v4
Per-process network	nettop	Cumulative bytes per process (~18ms subprocess)
CPU utilization	Mach API	host_processor_info tick deltas
Memory	Mach API	host_statistics64 (active + inactive + wired + compressor pages)
Keyboard	IORegistry PWM	Duty cycle * 0.5W max
Fans	SMC RPM	Cubic model: (RPM/RPM_max)^3 * 1W
Audio	CoreAudio + IOPMAssertions	Idle 0.05W + volume^2 * 1W
WiFi	SMC wiPm	Direct power measurement
Bluetooth	pmset	Fixed per device type (0.01-0.05W)
SSD	IORegistry counters	I/O utilization: 0.03-2.5W
Ethernet	getifaddrs	Link detection, speed, per-interface traffic (data only)
Network	getifaddrs	Per-interface byte counters for Ethernet and WiFi
USB	IORegistry PowerOutDetails	Per-port power measurement (Watts/PDPowermW)

IOReport channel naming (multi-die support)

IOReport channel names vary between single-die and multi-die (Ultra) chips. The parser handles both generically:

Single-die (M1/M2/M3/M4 base/Pro/Max):
  CPU Stats:    ECPU0, PCPU10             ← digit suffix
  Energy Model: EACC_CPU0, PACC0_CPU5     ← _CPU suffix
  Blocks:       ISP, DRAM, ANE, DISP      ← bare names

Multi-die (M1/M2/M3 Ultra):
  CPU Stats:    DIE_0_ECPU_CPU0, DIE_1_PCPU1_CPU3   ← DIE_N_ prefix + _CPU suffix
  Energy Model: DIE_0_EACC_CPU0, DIE_1_PACC1_CPU3   ← DIE_N_ prefix + _CPU suffix
  Blocks:       ISP0_0, DRAM0_1, ANE0_0              ← per-die suffix

Two design rules keep this forward-compatible with future chips:

1. strip_die_prefix generically removes DIE_{N}_ so downstream parsers always see the same base format
2. starts_with matching for block power handles any suffix Apple may add (e.g. ISP matches ISP, ISP0_0, ISP0_1, etc.)

If a new chip isn't detected correctly, run macpow --dump to see the raw IOReport channel names.

Requirements

• macOS 12+ (Monterey or later)
• Apple Silicon (M1, M2, M3, M4, M5 — any variant)
• Rust 1.70+

Release checklist

# 1. Bump version
vim Cargo.toml                        # update version = "X.Y.Z"

# 2. Build and verify
cargo build --release
cargo fmt --check                     # formatting clean
cargo clippy --release                # no new warnings in bin
cargo test                            # all tests pass

# 3. Update Homebrew badge in README.md
#    Change: homebrew-vX.Y.Z in the badge URL

# 4. Commit, tag, push
git add -A
git commit -m "Bump version to X.Y.Z"
git tag vX.Y.Z
git push origin main --tags
# CI will auto-create GitHub Release with binary

# 5. Publish to crates.io
cargo publish --dry-run
cargo publish

# 6. Update Homebrew tap (via PR to trigger bottle building)
curl -sL https://github.com/k06a/macpow/archive/refs/tags/vX.Y.Z.tar.gz | shasum -a 256
# Update url + sha256 in homebrew-tap/Formula/macpow.rb
cd ../homebrew-tap
git checkout -b update-macpow-X.Y.Z
git add Formula/macpow.rb
git commit -m "Update macpow to X.Y.Z"
git push origin update-macpow-X.Y.Z
# Create PR, wait for CI to build bottles, then add label "pr-pull"
# publish.yml will upload bottles and merge the PR

License

MIT