Compiling of OnlineHumidifier-openHAB.ino gives error

[semaf]

Hey,

There are missing some libraries and compiling has problems. Would you fix that?

cheers

[krzychb]

Hi semaf,

Thank you for issuing first report on this repository 😄

Please post the compilation log so I can check where the problem is.
What version of ESP8266 core you are using?
What is your version of Arduino IDE?

Krzysztof

[semaf]

Well there are a lot of Errors due the DHT, RF433, Emoncms etc.. I would say you should make a clean Sketch without additions of RF433 or anything else.. Just DHT22 + ESP8266 + OPENHAB + MQTT and that would be clean enough.

Errors:
#1 just compiled:

OnlineHumidifier-openHAB:31: error: 'D2' was not declared in this scope
OnlineHumidifier-openHAB:44: error: 'D1' was not declared in this scope
OnlineHumidifier-openHAB.ino:45:37: note: in expansion of macro 'RF433_TR_PIN'
'D2' was not declared in this scope

#2 corrected Pins to 2 and 14 instead D2 and D14:

OnlineHumidifier-openHAB.cpp.o: In function `MQTTkeepAlive()':
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:142: undefined reference to `setupWiFi()'
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:142: undefined reference to `setupWebserver()'
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:142: undefined reference to `setupOTA()'
OnlineHumidifier-openHAB.cpp.o: In function `MQTTpublishData()':
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:143: undefined reference to `setupWiFi()'
OnlineHumidifier-openHAB.cpp.o: In function `HardwareSerial::begin(unsigned long)':
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:143: undefined reference to `setupWebserver()'
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:143: undefined reference to `setupOTA()'
OnlineHumidifier-openHAB.cpp.o: In function `swap<void (*)(const std::_Any_data&, const MQTT::Publish&)>':
c:\users\michi\appdata\roaming\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2\xtensa-lx106-elf\include\c++\4.8.2\bits/move.h:177: undefined reference to `measureHumidity()'
OnlineHumidifier-openHAB.cpp.o: In function `swap<std::_Any_data>':
c:\users\michi\appdata\roaming\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2\xtensa-lx106-elf\include\c++\4.8.2\bits/move.h:176: undefined reference to `executeHumidityControl()'
OnlineHumidifier-openHAB.cpp.o: In function `swap<void (*)(const std::_Any_data&, const MQTT::Publish&)>':
c:\users\michi\appdata\roaming\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2\xtensa-lx106-elf\include\c++\4.8.2\bits/move.h:176: undefined reference to `sendDataToEmoncms()'
OnlineHumidifier-openHAB.cpp.o: In function `loop':
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:186: undefined reference to `measureHumidity()'
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:188: undefined reference to `executeHumidityControl()'
C:\Program Files (x86)\Arduino/OnlineHumidifier-openHAB.ino:191: undefined reference to `sendDataToEmoncms()'
collect2.exe: error: ld returned 1 exit status
Error compiling.

If I begin to clean all Errors it will take more time than to write a new one 💃 Thats why a clean version would be great :)

[krzychb]

I see your point and thank you for taking time to document it. This is a good opportunity to expand this repository with another section (Just DHT22 + ESP8266 + OPENHAB + MQTT).

• Removing Emoncms is easy to justify. Charts may be done directly in openHAB.
• What about RF433? I need to provide some reasonable way to automatically turn humidifier on and off for closed loop control. What would you provide instead?

Krzysztof

[semaf]

A delay is also fine. Mostly Humdity and Temperature Sensors are never going to be turned off but adding a delay would be enough.