Mali-400 build and usage of SMP code in preemptible code fixes. by rzk · Pull Request #6 · hardkernel/linux

rzk · 2013-01-07T23:38:24Z

Mali-400 build fix is needed because we dont use SVN system as ARM does for testing drivers.
SMP code fix is needed when SMP checking is enabled in kernel hacking, without this fix each usage of block devices pullutes console with stacktraces.

Source https://lkml.org/lkml/2011/7/26/6 Patch by Ming Lei

hardkernel · 2013-01-08T01:31:11Z

Thanks for your pains

Mali-400 build and usage of SMP code in preemptible code fixes.

commit 412d32e upstream. A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Mike Galbraith <mgalbraith@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…d reasons commit 5cf02d0 upstream. We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bea6832 upstream. On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ernel/git/vgupta/arc Pull new ARC architecture from Vineet Gupta: "Initial ARC Linux port with some fixes on top for 3.9-rc1: I would like to introduce the Linux port to ARC Processors (from Synopsys) for 3.9-rc1. The patch-set has been discussed on the public lists since Nov and has received a fair bit of review, specially from Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb... The arch bits are in arch/arc, some asm-generic changes (acked by Arnd), a minor change to PARISC (acked by Helge). The series is a touch bigger for a new port for 2 main reasons: 1. It enables a basic kernel in first sub-series and adds ptrace/kgdb/.. later 2. Some of the fallout of review (DeviceTree support, multi-platform- image support) were added on top of orig series, primarily to record the revision history. This updated pull request additionally contains - fixes due to our GNU tools catching up with the new syscall/ptrace ABI - some (minor) cross-arch Kconfig updates." * tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits) ARC: split elf.h into uapi and export it for userspace ARC: Fixup the current ABI version ARC: gdbserver using regset interface possibly broken ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window ARC: make a copy of flat DT ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed" ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled ARC: Fix pt_orig_r8 access ARC: [3.9] Fallout of hlist iterator update ARC: 64bit RTSC timestamp hardware issue ARC: Don't fiddle with non-existent caches ARC: Add self to MAINTAINERS ARC: Provide a default serial.h for uart drivers needing BASE_BAUD ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux ARC: [Review] Multi-platform image #8: platform registers SMP callbacks ARC: [Review] Multi-platform image #7: SMP common code to use callbacks ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core ARC: [Review] Multi-platform image #4: Isolate platform headers ARC: [Review] Multi-platform image #3: switch to board callback ...

[ Upstream commit 9cb6cb7 ] The following script will produce a kernel oops: sudo ip netns add v sudo ip netns exec v ip ad add 127.0.0.1/8 dev lo sudo ip netns exec v ip link set lo up sudo ip netns exec v ip ro add 224.0.0.0/4 dev lo sudo ip netns exec v ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev lo sudo ip netns exec v ip link set vxlan0 up sudo ip netns del v where inspect by gdb: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 107] 0xffffffffa0289e33 in ?? () (gdb) bt #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 #1 vxlan_stop (dev=0xffff88001bafa000) at drivers/net/vxlan.c:1087 #2 0xffffffff812cc498 in __dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1299 #3 0xffffffff812cd920 in dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1335 #4 0xffffffff812cef31 in rollback_registered_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:4851 #5 0xffffffff812cf040 in unregister_netdevice_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:5752 #6 0xffffffff812cf1ba in default_device_exit_batch (net_list=0xffff88001f2e7e18) at net/core/dev.c:6170 #7 0xffffffff812cab27 in cleanup_net (work=<optimized out>) at net/core/net_namespace.c:302 #8 0xffffffff810540ef in process_one_work (worker=0xffff88001ba9ed40, work=0xffffffff8167d020) at kernel/workqueue.c:2157 #9 0xffffffff810549d0 in worker_thread (__worker=__worker@entry=0xffff88001ba9ed40) at kernel/workqueue.c:2276 #10 0xffffffff8105870c in kthread (_create=0xffff88001f2e5d68) at kernel/kthread.c:168 #11 <signal handler called> #12 0x0000000000000000 in ?? () #13 0x0000000000000000 in ?? () (gdb) fr 0 #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 533 struct sock *sk = vn->sock->sk; (gdb) l 528 static int vxlan_leave_group(struct net_device *dev) 529 { 530 struct vxlan_dev *vxlan = netdev_priv(dev); 531 struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); 532 int err = 0; 533 struct sock *sk = vn->sock->sk; 534 struct ip_mreqn mreq = { 535 .imr_multiaddr.s_addr = vxlan->gaddr, 536 .imr_ifindex = vxlan->link, 537 }; (gdb) p vn->sock $4 = (struct socket *) 0x0 The kernel calls `vxlan_exit_net` when deleting the netns before shutting down vxlan interfaces. Later the removal of all vxlan interfaces, where `vn->sock` is already gone causes the oops. so we should manually shutdown all interfaces before deleting `vn->sock` as the patch does. Signed-off-by: Zang MingJie <zealot0630@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ff931c8 upstream. clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac7 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406 c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac7 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406 c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>

commit 8f294b5 upstream. The settimeofday01 test in the LTP testsuite effectively does gettimeofday(current time); settimeofday(Jan 1, 1970 + 100 seconds); settimeofday(current time); This test causes a stack trace to be displayed on the console during the setting of timeofday to Jan 1, 1970 + 100 seconds: [ 131.066751] ------------[ cut here ]------------ [ 131.096448] WARNING: at kernel/time/clockevents.c:209 clockevents_program_event+0x135/0x140() [ 131.104935] Hardware name: Dinar [ 131.108150] Modules linked in: sg nfsv3 nfs_acl nfsv4 auth_rpcgss nfs dns_resolver fscache lockd sunrpc nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables kvm_amd kvm sp5100_tco bnx2 i2c_piix4 crc32c_intel k10temp fam15h_power ghash_clmulni_intel amd64_edac_mod pcspkr serio_raw edac_mce_amd edac_core microcode xfs libcrc32c sr_mod sd_mod cdrom ata_generic crc_t10dif pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm ahci pata_atiixp libahci libata usb_storage i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 131.176784] Pid: 0, comm: swapper/28 Not tainted 3.8.0+ #6 [ 131.182248] Call Trace: [ 131.184684] <IRQ> [<ffffffff810612af>] warn_slowpath_common+0x7f/0xc0 [ 131.191312] [<ffffffff8106130a>] warn_slowpath_null+0x1a/0x20 [ 131.197131] [<ffffffff810b9fd5>] clockevents_program_event+0x135/0x140 [ 131.203721] [<ffffffff810bb584>] tick_program_event+0x24/0x30 [ 131.209534] [<ffffffff81089ab1>] hrtimer_interrupt+0x131/0x230 [ 131.215437] [<ffffffff814b9600>] ? cpufreq_p4_target+0x130/0x130 [ 131.221509] [<ffffffff81619119>] smp_apic_timer_interrupt+0x69/0x99 [ 131.227839] [<ffffffff8161805d>] apic_timer_interrupt+0x6d/0x80 [ 131.233816] <EOI> [<ffffffff81099745>] ? sched_clock_cpu+0xc5/0x120 [ 131.240267] [<ffffffff814b9ff0>] ? cpuidle_wrap_enter+0x50/0xa0 [ 131.246252] [<ffffffff814b9fe9>] ? cpuidle_wrap_enter+0x49/0xa0 [ 131.252238] [<ffffffff814ba050>] cpuidle_enter_tk+0x10/0x20 [ 131.257877] [<ffffffff814b9c89>] cpuidle_idle_call+0xa9/0x260 [ 131.263692] [<ffffffff8101c42f>] cpu_idle+0xaf/0x120 [ 131.268727] [<ffffffff815f8971>] start_secondary+0x255/0x257 [ 131.274449] ---[ end trace 1151a50552231615 ]--- When we change the system time to a low value like this, the value of timekeeper->offs_real will be a negative value. It seems that the WARN occurs because an hrtimer has been started in the time between the releasing of the timekeeper lock and the IPI call (via a call to on_each_cpu) in clock_was_set() in the do_settimeofday() code. The end result is that a REALTIME_CLOCK timer has been added with softexpires = expires = KTIME_MAX. The hrtimer_interrupt() fires/is called and the loop at kernel/hrtimer.c:1289 is executed. In this loop the code subtracts the clock base's offset (which was set to timekeeper->offs_real in do_settimeofday()) from the current hrtimer_cpu_base->expiry value (which was KTIME_MAX): KTIME_MAX - (a negative value) = overflow A simple check for an overflow can resolve this problem. Using KTIME_MAX instead of the overflow value will result in the hrtimer function being run, and the reprogramming of the timer after that. Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Prarit Bhargava <prarit@redhat.com> [jstultz: Tweaked commit subject] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Toralf reported the following oops to the linux-nfs mailing list: -----------------[snip]------------------ NFSD: unable to generate recoverydir name (-2). NFSD: disabling legacy clientid tracking. Reboot recovery will not function correctly! BUG: unable to handle kernel NULL pointer dereference at 000003c8 IP: [<f90a3d91>] nfsd4_client_tracking_exit+0x11/0x50 [nfsd] *pdpt = 000000002ba33001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: loop nfsd auth_rpcgss ipt_MASQUERADE xt_owner xt_multiport ipt_REJECT xt_tcpudp xt_recent xt_conntrack nf_conntrack_ftp xt_limit xt_LOG iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables af_packet pppoe pppox ppp_generic slhc bridge stp llc tun arc4 iwldvm mac80211 coretemp kvm_intel uvcvideo sdhci_pci sdhci mmc_core videobuf2_vmalloc videobuf2_memops usblp videobuf2_core i915 iwlwifi psmouse videodev cfg80211 kvm fbcon bitblit cfbfillrect acpi_cpufreq mperf evdev softcursor font cfbimgblt i2c_algo_bit cfbcopyarea intel_agp intel_gtt drm_kms_helper snd_hda_codec_conexant drm agpgart fb fbdev tpm_tis thinkpad_acpi tpm nvram e1000e rfkill thermal ptp wmi pps_core tpm_bios 8250_pci processor 8250 ac snd_hda_intel snd_hda_codec snd_pcm battery video i2c_i801 snd_page_alloc snd_timer button serial_core i2c_core snd soundcore thermal_sys hwmon aesni_intel ablk_helper cryp td lrw aes_i586 xts gf128mul cbc fuse nfs lockd sunrpc dm_crypt dm_mod hid_monterey hid_microsoft hid_logitech hid_ezkey hid_cypress hid_chicony hid_cherry hid_belkin hid_apple hid_a4tech hid_generic usbhid hid sr_mod cdrom sg [last unloaded: microcode] Pid: 6374, comm: nfsd Not tainted 3.9.1 #6 LENOVO 4180F65/4180F65 EIP: 0060:[<f90a3d91>] EFLAGS: 00010202 CPU: 0 EIP is at nfsd4_client_tracking_exit+0x11/0x50 [nfsd] EAX: 00000000 EBX: fffffffe ECX: 00000007 EDX: 00000007 ESI: eb9dcb00 EDI: eb2991c0 EBP: eb2bde38 ESP: eb2bde34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 000003c8 CR3: 2ba80000 CR4: 000407f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process nfsd (pid: 6374, ti=eb2bc000 task=eb2711c0 task.ti=eb2bc000) Stack: fffffffe eb2bde4c f90a3e0c f90a7754 fffffffe eb0a9c00 eb2bdea0 f90a41ed eb2991c0 1b270000 eb2991c0 eb2bde7c f9099ce9 eb2bde98 0129a020 eb29a020 eb2bdecc eb2991c0 eb2bdea8 f9099da5 00000000 eb9dcb00 00000001 67822f08 Call Trace: [<f90a3e0c>] legacy_recdir_name_error+0x3c/0x40 [nfsd] [<f90a41ed>] nfsd4_create_clid_dir+0x15d/0x1c0 [nfsd] [<f9099ce9>] ? nfsd4_lookup_stateid+0x99/0xd0 [nfsd] [<f9099da5>] ? nfs4_preprocess_seqid_op+0x85/0x100 [nfsd] [<f90a4287>] nfsd4_client_record_create+0x37/0x50 [nfsd] [<f909d6ce>] nfsd4_open_confirm+0xfe/0x130 [nfsd] [<f90980b1>] ? nfsd4_encode_operation+0x61/0x90 [nfsd] [<f909d5d0>] ? nfsd4_free_stateid+0xc0/0xc0 [nfsd] [<f908fd0b>] nfsd4_proc_compound+0x41b/0x530 [nfsd] [<f9081b7b>] nfsd_dispatch+0x8b/0x1a0 [nfsd] [<f857b85d>] svc_process+0x3dd/0x640 [sunrpc] [<f908165d>] nfsd+0xad/0x110 [nfsd] [<f90815b0>] ? nfsd_destroy+0x70/0x70 [nfsd] [<c1054824>] kthread+0x94/0xa0 [<c1486937>] ret_from_kernel_thread+0x1b/0x28 [<c1054790>] ? flush_kthread_work+0xd0/0xd0 Code: 86 b0 00 00 00 90 c5 0a f9 c7 04 24 70 76 0a f9 e8 74 a9 3d c8 eb ba 8d 76 00 55 89 e5 53 66 66 66 66 90 8b 15 68 c7 0a f9 85 d2 <8b> 88 c8 03 00 00 74 2c 3b 11 77 28 8b 5c 91 08 85 db 74 22 8b EIP: [<f90a3d91>] nfsd4_client_tracking_exit+0x11/0x50 [nfsd] SS:ESP 0068:eb2bde34 CR2: 00000000000003c8 ---[ end trace 09e54015d145c9c6 ]--- The problem appears to be a regression that was introduced in commit 9a9c647 "nfsd: make NFSv4 recovery client tracking options per net". Prior to that commit, it was safe to pass a NULL net pointer to nfsd4_client_tracking_exit in the legacy recdir case, and legacy_recdir_name_error did so. After that comit, the net pointer must be valid. This patch just fixes legacy_recdir_name_error to pass in a valid net pointer to that function. Cc: <stable@vger.kernel.org> # v3.8+ Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>

commit 7255e71 upstream. Toralf reported the following oops to the linux-nfs mailing list: -----------------[snip]------------------ NFSD: unable to generate recoverydir name (-2). NFSD: disabling legacy clientid tracking. Reboot recovery will not function correctly! BUG: unable to handle kernel NULL pointer dereference at 000003c8 IP: [<f90a3d91>] nfsd4_client_tracking_exit+0x11/0x50 [nfsd] *pdpt = 000000002ba33001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: loop nfsd auth_rpcgss ipt_MASQUERADE xt_owner xt_multiport ipt_REJECT xt_tcpudp xt_recent xt_conntrack nf_conntrack_ftp xt_limit xt_LOG iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables af_packet pppoe pppox ppp_generic slhc bridge stp llc tun arc4 iwldvm mac80211 coretemp kvm_intel uvcvideo sdhci_pci sdhci mmc_core videobuf2_vmalloc videobuf2_memops usblp videobuf2_core i915 iwlwifi psmouse videodev cfg80211 kvm fbcon bitblit cfbfillrect acpi_cpufreq mperf evdev softcursor font cfbimgblt i2c_algo_bit cfbcopyarea intel_agp intel_gtt drm_kms_helper snd_hda_codec_conexant drm agpgart fb fbdev tpm_tis thinkpad_acpi tpm nvram e1000e rfkill thermal ptp wmi pps_core tpm_bios 8250_pci processor 8250 ac snd_hda_intel snd_hda_codec snd_pcm battery video i2c_i801 snd_page_alloc snd_timer button serial_core i2c_core snd soundcore thermal_sys hwmon aesni_intel ablk_helper cryp td lrw aes_i586 xts gf128mul cbc fuse nfs lockd sunrpc dm_crypt dm_mod hid_monterey hid_microsoft hid_logitech hid_ezkey hid_cypress hid_chicony hid_cherry hid_belkin hid_apple hid_a4tech hid_generic usbhid hid sr_mod cdrom sg [last unloaded: microcode] Pid: 6374, comm: nfsd Not tainted 3.9.1 #6 LENOVO 4180F65/4180F65 EIP: 0060:[<f90a3d91>] EFLAGS: 00010202 CPU: 0 EIP is at nfsd4_client_tracking_exit+0x11/0x50 [nfsd] EAX: 00000000 EBX: fffffffe ECX: 00000007 EDX: 00000007 ESI: eb9dcb00 EDI: eb2991c0 EBP: eb2bde38 ESP: eb2bde34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 000003c8 CR3: 2ba80000 CR4: 000407f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process nfsd (pid: 6374, ti=eb2bc000 task=eb2711c0 task.ti=eb2bc000) Stack: fffffffe eb2bde4c f90a3e0c f90a7754 fffffffe eb0a9c00 eb2bdea0 f90a41ed eb2991c0 1b270000 eb2991c0 eb2bde7c f9099ce9 eb2bde98 0129a020 eb29a020 eb2bdecc eb2991c0 eb2bdea8 f9099da5 00000000 eb9dcb00 00000001 67822f08 Call Trace: [<f90a3e0c>] legacy_recdir_name_error+0x3c/0x40 [nfsd] [<f90a41ed>] nfsd4_create_clid_dir+0x15d/0x1c0 [nfsd] [<f9099ce9>] ? nfsd4_lookup_stateid+0x99/0xd0 [nfsd] [<f9099da5>] ? nfs4_preprocess_seqid_op+0x85/0x100 [nfsd] [<f90a4287>] nfsd4_client_record_create+0x37/0x50 [nfsd] [<f909d6ce>] nfsd4_open_confirm+0xfe/0x130 [nfsd] [<f90980b1>] ? nfsd4_encode_operation+0x61/0x90 [nfsd] [<f909d5d0>] ? nfsd4_free_stateid+0xc0/0xc0 [nfsd] [<f908fd0b>] nfsd4_proc_compound+0x41b/0x530 [nfsd] [<f9081b7b>] nfsd_dispatch+0x8b/0x1a0 [nfsd] [<f857b85d>] svc_process+0x3dd/0x640 [sunrpc] [<f908165d>] nfsd+0xad/0x110 [nfsd] [<f90815b0>] ? nfsd_destroy+0x70/0x70 [nfsd] [<c1054824>] kthread+0x94/0xa0 [<c1486937>] ret_from_kernel_thread+0x1b/0x28 [<c1054790>] ? flush_kthread_work+0xd0/0xd0 Code: 86 b0 00 00 00 90 c5 0a f9 c7 04 24 70 76 0a f9 e8 74 a9 3d c8 eb ba 8d 76 00 55 89 e5 53 66 66 66 66 90 8b 15 68 c7 0a f9 85 d2 <8b> 88 c8 03 00 00 74 2c 3b 11 77 28 8b 5c 91 08 85 db 74 22 8b EIP: [<f90a3d91>] nfsd4_client_tracking_exit+0x11/0x50 [nfsd] SS:ESP 0068:eb2bde34 CR2: 00000000000003c8 ---[ end trace 09e54015d145c9c6 ]--- The problem appears to be a regression that was introduced in commit 9a9c647 "nfsd: make NFSv4 recovery client tracking options per net". Prior to that commit, it was safe to pass a NULL net pointer to nfsd4_client_tracking_exit in the legacy recdir case, and legacy_recdir_name_error did so. After that comit, the net pointer must be valid. This patch just fixes legacy_recdir_name_error to pass in a valid net pointer to that function. Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: #3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77 #4 [ffff88003fc03948] icmp_send at ffffffff814d5fec #5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795 #6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965 #7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032 #8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66 #9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd #10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7 #11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596 Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The following backtrace is reported with CONFIG_PROVE_RCU: drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/0:1/56: #0: (events){.+.+.+}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #1: ((&wfc.work)){+.+.+.}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #2: (device_mutex){+.+.+.}, at: [<ffffffffa0148dd8>] ib_register_device+0x38/0x220 [ib_core] #3: (&(&dev->lk_table.lock)->rlock){......}, at: [<ffffffffa017e81c>] qib_alloc_lkey+0x3c/0x1b0 [ib_qib] stack backtrace: Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6 Call Trace: [<ffffffff810c0b85>] lockdep_rcu_suspicious+0xe5/0x130 [<ffffffffa017e8e1>] qib_alloc_lkey+0x101/0x1b0 [ib_qib] [<ffffffffa0184886>] qib_get_dma_mr+0xa6/0xd0 [ib_qib] [<ffffffffa01461aa>] ib_get_dma_mr+0x1a/0x50 [ib_core] [<ffffffffa01678dc>] ib_mad_port_open+0x12c/0x390 [ib_mad] [<ffffffff810c2c55>] ? trace_hardirqs_on_caller+0x105/0x190 [<ffffffffa0167b92>] ib_mad_init_device+0x52/0x110 [ib_mad] [<ffffffffa01917c0>] ? sl2vl_attr_show+0x30/0x30 [ib_qib] [<ffffffffa0148f49>] ib_register_device+0x1a9/0x220 [ib_core] [<ffffffffa01b1685>] qib_register_ib_device+0x735/0xa40 [ib_qib] [<ffffffff8106ba98>] ? mod_timer+0x118/0x220 [<ffffffffa017d425>] qib_init_one+0x1e5/0x400 [ib_qib] [<ffffffff812ce86e>] local_pci_probe+0x4e/0x90 [<ffffffff81078118>] work_for_cpu_fn+0x18/0x30 [<ffffffff8107a566>] process_one_work+0x1d6/0x4a0 [<ffffffff8107a4f5>] ? process_one_work+0x165/0x4a0 [<ffffffff8107c9c9>] worker_thread+0x119/0x370 [<ffffffff8107c8b0>] ? manage_workers+0x180/0x180 [<ffffffff8108294e>] kthread+0xee/0x100 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815c04ac>] ret_from_fork+0x7c/0xb0 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer() vs. rcu_dereference(). Reported-by: Jay Fenlason <fenlason@redhat.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>

BugLink: http://bugs.launchpad.net/bugs/1178361 commit 8f294b5 upstream. The settimeofday01 test in the LTP testsuite effectively does gettimeofday(current time); settimeofday(Jan 1, 1970 + 100 seconds); settimeofday(current time); This test causes a stack trace to be displayed on the console during the setting of timeofday to Jan 1, 1970 + 100 seconds: [ 131.066751] ------------[ cut here ]------------ [ 131.096448] WARNING: at kernel/time/clockevents.c:209 clockevents_program_event+0x135/0x140() [ 131.104935] Hardware name: Dinar [ 131.108150] Modules linked in: sg nfsv3 nfs_acl nfsv4 auth_rpcgss nfs dns_resolver fscache lockd sunrpc nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables kvm_amd kvm sp5100_tco bnx2 i2c_piix4 crc32c_intel k10temp fam15h_power ghash_clmulni_intel amd64_edac_mod pcspkr serio_raw edac_mce_amd edac_core microcode xfs libcrc32c sr_mod sd_mod cdrom ata_generic crc_t10dif pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm ahci pata_atiixp libahci libata usb_storage i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 131.176784] Pid: 0, comm: swapper/28 Not tainted 3.8.0+ #6 [ 131.182248] Call Trace: [ 131.184684] <IRQ> [<ffffffff810612af>] warn_slowpath_common+0x7f/0xc0 [ 131.191312] [<ffffffff8106130a>] warn_slowpath_null+0x1a/0x20 [ 131.197131] [<ffffffff810b9fd5>] clockevents_program_event+0x135/0x140 [ 131.203721] [<ffffffff810bb584>] tick_program_event+0x24/0x30 [ 131.209534] [<ffffffff81089ab1>] hrtimer_interrupt+0x131/0x230 [ 131.215437] [<ffffffff814b9600>] ? cpufreq_p4_target+0x130/0x130 [ 131.221509] [<ffffffff81619119>] smp_apic_timer_interrupt+0x69/0x99 [ 131.227839] [<ffffffff8161805d>] apic_timer_interrupt+0x6d/0x80 [ 131.233816] <EOI> [<ffffffff81099745>] ? sched_clock_cpu+0xc5/0x120 [ 131.240267] [<ffffffff814b9ff0>] ? cpuidle_wrap_enter+0x50/0xa0 [ 131.246252] [<ffffffff814b9fe9>] ? cpuidle_wrap_enter+0x49/0xa0 [ 131.252238] [<ffffffff814ba050>] cpuidle_enter_tk+0x10/0x20 [ 131.257877] [<ffffffff814b9c89>] cpuidle_idle_call+0xa9/0x260 [ 131.263692] [<ffffffff8101c42f>] cpu_idle+0xaf/0x120 [ 131.268727] [<ffffffff815f8971>] start_secondary+0x255/0x257 [ 131.274449] ---[ end trace 1151a50552231615 ]--- When we change the system time to a low value like this, the value of timekeeper->offs_real will be a negative value. It seems that the WARN occurs because an hrtimer has been started in the time between the releasing of the timekeeper lock and the IPI call (via a call to on_each_cpu) in clock_was_set() in the do_settimeofday() code. The end result is that a REALTIME_CLOCK timer has been added with softexpires = expires = KTIME_MAX. The hrtimer_interrupt() fires/is called and the loop at kernel/hrtimer.c:1289 is executed. In this loop the code subtracts the clock base's offset (which was set to timekeeper->offs_real in do_settimeofday()) from the current hrtimer_cpu_base->expiry value (which was KTIME_MAX): KTIME_MAX - (a negative value) = overflow A simple check for an overflow can resolve this problem. Using KTIME_MAX instead of the overflow value will result in the hrtimer function being run, and the reprogramming of the timer after that. Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Prarit Bhargava <prarit@redhat.com> [jstultz: Tweaked commit subject] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Steve Conklin <sconklin@canonical.com>

BugLink: http://bugs.launchpad.net/bugs/1187551 commit 7255e71 upstream. Toralf reported the following oops to the linux-nfs mailing list: -----------------[snip]------------------ NFSD: unable to generate recoverydir name (-2). NFSD: disabling legacy clientid tracking. Reboot recovery will not function correctly! BUG: unable to handle kernel NULL pointer dereference at 000003c8 IP: [<f90a3d91>] nfsd4_client_tracking_exit+0x11/0x50 [nfsd] *pdpt = 000000002ba33001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: loop nfsd auth_rpcgss ipt_MASQUERADE xt_owner xt_multiport ipt_REJECT xt_tcpudp xt_recent xt_conntrack nf_conntrack_ftp xt_limit xt_LOG iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables af_packet pppoe pppox ppp_generic slhc bridge stp llc tun arc4 iwldvm mac80211 coretemp kvm_intel uvcvideo sdhci_pci sdhci mmc_core videobuf2_vmalloc videobuf2_memops usblp videobuf2_core i915 iwlwifi psmouse videodev cfg80211 kvm fbcon bitblit cfbfillrect acpi_cpufreq mperf evdev softcursor font cfbimgblt i2c_algo_bit cfbcopyarea intel_agp intel_gtt drm_kms_helper snd_hda_codec_conexant drm agpgart fb fbdev tpm_tis thinkpad_acpi tpm nvram e1000e rfkill thermal ptp wmi pps_core tpm_bios 8250_pci processor 8250 ac snd_hda_intel snd_hda_codec snd_pcm battery video i2c_i801 snd_page_alloc snd_timer button serial_core i2c_core snd soundcore thermal_sys hwmon aesni_intel ablk_helper cryp td lrw aes_i586 xts gf128mul cbc fuse nfs lockd sunrpc dm_crypt dm_mod hid_monterey hid_microsoft hid_logitech hid_ezkey hid_cypress hid_chicony hid_cherry hid_belkin hid_apple hid_a4tech hid_generic usbhid hid sr_mod cdrom sg [last unloaded: microcode] Pid: 6374, comm: nfsd Not tainted 3.9.1 #6 LENOVO 4180F65/4180F65 EIP: 0060:[<f90a3d91>] EFLAGS: 00010202 CPU: 0 EIP is at nfsd4_client_tracking_exit+0x11/0x50 [nfsd] EAX: 00000000 EBX: fffffffe ECX: 00000007 EDX: 00000007 ESI: eb9dcb00 EDI: eb2991c0 EBP: eb2bde38 ESP: eb2bde34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 000003c8 CR3: 2ba80000 CR4: 000407f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process nfsd (pid: 6374, ti=eb2bc000 task=eb2711c0 task.ti=eb2bc000) Stack: fffffffe eb2bde4c f90a3e0c f90a7754 fffffffe eb0a9c00 eb2bdea0 f90a41ed eb2991c0 1b270000 eb2991c0 eb2bde7c f9099ce9 eb2bde98 0129a020 eb29a020 eb2bdecc eb2991c0 eb2bdea8 f9099da5 00000000 eb9dcb00 00000001 67822f08 Call Trace: [<f90a3e0c>] legacy_recdir_name_error+0x3c/0x40 [nfsd] [<f90a41ed>] nfsd4_create_clid_dir+0x15d/0x1c0 [nfsd] [<f9099ce9>] ? nfsd4_lookup_stateid+0x99/0xd0 [nfsd] [<f9099da5>] ? nfs4_preprocess_seqid_op+0x85/0x100 [nfsd] [<f90a4287>] nfsd4_client_record_create+0x37/0x50 [nfsd] [<f909d6ce>] nfsd4_open_confirm+0xfe/0x130 [nfsd] [<f90980b1>] ? nfsd4_encode_operation+0x61/0x90 [nfsd] [<f909d5d0>] ? nfsd4_free_stateid+0xc0/0xc0 [nfsd] [<f908fd0b>] nfsd4_proc_compound+0x41b/0x530 [nfsd] [<f9081b7b>] nfsd_dispatch+0x8b/0x1a0 [nfsd] [<f857b85d>] svc_process+0x3dd/0x640 [sunrpc] [<f908165d>] nfsd+0xad/0x110 [nfsd] [<f90815b0>] ? nfsd_destroy+0x70/0x70 [nfsd] [<c1054824>] kthread+0x94/0xa0 [<c1486937>] ret_from_kernel_thread+0x1b/0x28 [<c1054790>] ? flush_kthread_work+0xd0/0xd0 Code: 86 b0 00 00 00 90 c5 0a f9 c7 04 24 70 76 0a f9 e8 74 a9 3d c8 eb ba 8d 76 00 55 89 e5 53 66 66 66 66 90 8b 15 68 c7 0a f9 85 d2 <8b> 88 c8 03 00 00 74 2c 3b 11 77 28 8b 5c 91 08 85 db 74 22 8b EIP: [<f90a3d91>] nfsd4_client_tracking_exit+0x11/0x50 [nfsd] SS:ESP 0068:eb2bde34 CR2: 00000000000003c8 ---[ end trace 09e54015d145c9c6 ]--- The problem appears to be a regression that was introduced in commit 9a9c647 "nfsd: make NFSv4 recovery client tracking options per net". Prior to that commit, it was safe to pass a NULL net pointer to nfsd4_client_tracking_exit in the legacy recdir case, and legacy_recdir_name_error did so. After that comit, the net pointer must be valid. This patch just fixes legacy_recdir_name_error to pass in a valid net pointer to that function. Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Steve Conklin <sconklin@canonical.com>

…condition commit 26c1917 upstream. When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8f294b5 upstream. The settimeofday01 test in the LTP testsuite effectively does gettimeofday(current time); settimeofday(Jan 1, 1970 + 100 seconds); settimeofday(current time); This test causes a stack trace to be displayed on the console during the setting of timeofday to Jan 1, 1970 + 100 seconds: [ 131.066751] ------------[ cut here ]------------ [ 131.096448] WARNING: at kernel/time/clockevents.c:209 clockevents_program_event+0x135/0x140() [ 131.104935] Hardware name: Dinar [ 131.108150] Modules linked in: sg nfsv3 nfs_acl nfsv4 auth_rpcgss nfs dns_resolver fscache lockd sunrpc nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables kvm_amd kvm sp5100_tco bnx2 i2c_piix4 crc32c_intel k10temp fam15h_power ghash_clmulni_intel amd64_edac_mod pcspkr serio_raw edac_mce_amd edac_core microcode xfs libcrc32c sr_mod sd_mod cdrom ata_generic crc_t10dif pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm ahci pata_atiixp libahci libata usb_storage i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 131.176784] Pid: 0, comm: swapper/28 Not tainted 3.8.0+ #6 [ 131.182248] Call Trace: [ 131.184684] <IRQ> [<ffffffff810612af>] warn_slowpath_common+0x7f/0xc0 [ 131.191312] [<ffffffff8106130a>] warn_slowpath_null+0x1a/0x20 [ 131.197131] [<ffffffff810b9fd5>] clockevents_program_event+0x135/0x140 [ 131.203721] [<ffffffff810bb584>] tick_program_event+0x24/0x30 [ 131.209534] [<ffffffff81089ab1>] hrtimer_interrupt+0x131/0x230 [ 131.215437] [<ffffffff814b9600>] ? cpufreq_p4_target+0x130/0x130 [ 131.221509] [<ffffffff81619119>] smp_apic_timer_interrupt+0x69/0x99 [ 131.227839] [<ffffffff8161805d>] apic_timer_interrupt+0x6d/0x80 [ 131.233816] <EOI> [<ffffffff81099745>] ? sched_clock_cpu+0xc5/0x120 [ 131.240267] [<ffffffff814b9ff0>] ? cpuidle_wrap_enter+0x50/0xa0 [ 131.246252] [<ffffffff814b9fe9>] ? cpuidle_wrap_enter+0x49/0xa0 [ 131.252238] [<ffffffff814ba050>] cpuidle_enter_tk+0x10/0x20 [ 131.257877] [<ffffffff814b9c89>] cpuidle_idle_call+0xa9/0x260 [ 131.263692] [<ffffffff8101c42f>] cpu_idle+0xaf/0x120 [ 131.268727] [<ffffffff815f8971>] start_secondary+0x255/0x257 [ 131.274449] ---[ end trace 1151a50552231615 ]--- When we change the system time to a low value like this, the value of timekeeper->offs_real will be a negative value. It seems that the WARN occurs because an hrtimer has been started in the time between the releasing of the timekeeper lock and the IPI call (via a call to on_each_cpu) in clock_was_set() in the do_settimeofday() code. The end result is that a REALTIME_CLOCK timer has been added with softexpires = expires = KTIME_MAX. The hrtimer_interrupt() fires/is called and the loop at kernel/hrtimer.c:1289 is executed. In this loop the code subtracts the clock base's offset (which was set to timekeeper->offs_real in do_settimeofday()) from the current hrtimer_cpu_base->expiry value (which was KTIME_MAX): KTIME_MAX - (a negative value) = overflow A simple check for an overflow can resolve this problem. Using KTIME_MAX instead of the overflow value will result in the hrtimer function being run, and the reprogramming of the timer after that. Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Prarit Bhargava <prarit@redhat.com> [jstultz: Tweaked commit subject] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3cf003c upstream. [The async read code was broadened to include uncached reads in 3.5, so the mainline patch did not apply directly. This patch is just a backport to account for that change.] Jian found that when he ran fsx on a 32 bit arch with a large wsize the process and one of the bdi writeback kthreads would sometimes deadlock with a stack trace like this: crash> bt PID: 2789 TASK: f02edaa0 CPU: 3 COMMAND: "fsx" #0 [eed63cbc] schedule at c083c5b3 #1 [eed63d80] kmap_high at c0500ec8 #2 [eed63db] cifs_async_writev at f7fabcd7 [cifs] #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs] #4 [eed63e50] do_writepages at c04f3e32 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a #6 [eed63ea4] filemap_fdatawrite at c04e1b3e #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs] #8 [eed63ecc] do_sync_write at c052d202 #9 [eed63f74] vfs_write at c052d4ee #10 [eed63f94] sys_write at c052df4c #11 [eed63fb0] ia32_sysenter_target at c0409a98 EAX: 00000004 EBX: 00000003 ECX: abd73b73 EDX: 012a65c6 DS: 007b ESI: 012a65c6 ES: 007b EDI: 00000000 SS: 007b ESP: bf8db17 EBP: bf8db1f8 GS: 0033 CS: 0073 EIP: 40000424 ERR: 00000004 EFLAGS: 00000246 Each task would kmap part of its address array before getting stuck, but not enough to actually issue the write. This patch fixes this by serializing the marshal_iov operations for async reads and writes. The idea here is to ensure that cifs aggressively tries to populate a request before attempting to fulfill another one. As soon as all of the pages are kmapped for a request, then we can unlock and allow another one to proceed. There's no need to do this serialization on non-CONFIG_HIGHMEM arches however, so optimize all of this out when CONFIG_HIGHMEM isn't set. Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…d reasons commit 5cf02d0 upstream. We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bea6832 upstream. On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 412d32e upstream. A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Mike Galbraith <mgalbraith@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In Steven Rostedt's words: > I've been debugging the last couple of days why my tests have been > locking up. One of my tracing tests, runs all available tracers. The > lockup always happened with the mmiotrace, which is used to trace > interactions between priority drivers and the kernel. But to do this > easily, when the tracer gets registered, it disables all but the boot > CPUs. The lockup always happened after it got done disabling the CPUs. > > Then I decided to try this: > > while :; do > for i in 1 2 3; do > echo 0 > /sys/devices/system/cpu/cpu$i/online > done > for i in 1 2 3; do > echo 1 > /sys/devices/system/cpu/cpu$i/online > done > done > > Well, sure enough, that locked up too, with the same users. Doing a > sysrq-w (showing all blocked tasks): > > [ 2991.344562] task PC stack pid father > [ 2991.344562] rcu_preempt D ffff88007986fdf8 0 10 2 0x00000000 > [ 2991.344562] ffff88007986fc98 0000000000000002 ffff88007986fc48 0000000000000908 > [ 2991.344562] ffff88007986c280 ffff88007986ffd8 ffff88007986ffd8 00000000001d3c80 > [ 2991.344562] ffff880079248a40 ffff88007986c280 0000000000000000 00000000fffd4295 > [ 2991.344562] Call Trace: > [ 2991.344562] [<ffffffff815437ba>] schedule+0x64/0x66 > [ 2991.344562] [<ffffffff81541750>] schedule_timeout+0xbc/0xf9 > [ 2991.344562] [<ffffffff8154bec0>] ? ftrace_call+0x5/0x2f > [ 2991.344562] [<ffffffff81049513>] ? cascade+0xa8/0xa8 > [ 2991.344562] [<ffffffff815417ab>] schedule_timeout_uninterruptible+0x1e/0x20 > [ 2991.344562] [<ffffffff810c980c>] rcu_gp_kthread+0x502/0x94b > [ 2991.344562] [<ffffffff81062791>] ? __init_waitqueue_head+0x50/0x50 > [ 2991.344562] [<ffffffff810c930a>] ? rcu_gp_fqs+0x64/0x64 > [ 2991.344562] [<ffffffff81061cdb>] kthread+0xb1/0xb9 > [ 2991.344562] [<ffffffff81091e31>] ? lock_release_holdtime.part.23+0x4e/0x55 > [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] [<ffffffff8154c1dc>] ret_from_fork+0x7c/0xb0 > [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] kworker/0:1 D ffffffff81a30680 0 47 2 0x00000000 > [ 2991.344562] Workqueue: events cpuset_hotplug_workfn > [ 2991.344562] ffff880078dbbb58 0000000000000002 0000000000000006 00000000000000d8 > [ 2991.344562] ffff880078db8100 ffff880078dbbfd8 ffff880078dbbfd8 00000000001d3c80 > [ 2991.344562] ffff8800779ca5c0 ffff880078db8100 ffffffff81541fcf 0000000000000000 > [ 2991.344562] Call Trace: > [ 2991.344562] [<ffffffff81541fcf>] ? __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [<ffffffff815437ba>] schedule+0x64/0x66 > [ 2991.344562] [<ffffffff81543a39>] schedule_preempt_disabled+0x18/0x24 > [ 2991.344562] [<ffffffff81541fcf>] __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [<ffffffff8103d11b>] ? get_online_cpus+0x3c/0x50 > [ 2991.344562] [<ffffffff8103d11b>] ? get_online_cpus+0x3c/0x50 > [ 2991.344562] [<ffffffff815422ff>] mutex_lock_nested+0x3b/0x40 > [ 2991.344562] [<ffffffff8103d11b>] get_online_cpus+0x3c/0x50 > [ 2991.344562] [<ffffffff810af7e6>] rebuild_sched_domains_locked+0x6e/0x3a8 > [ 2991.344562] [<ffffffff810b0ec6>] rebuild_sched_domains+0x1c/0x2a > [ 2991.344562] [<ffffffff810b109b>] cpuset_hotplug_workfn+0x1c7/0x1d3 > [ 2991.344562] [<ffffffff810b0ed9>] ? cpuset_hotplug_workfn+0x5/0x1d3 > [ 2991.344562] [<ffffffff81058e07>] process_one_work+0x2d4/0x4d1 > [ 2991.344562] [<ffffffff81058d3a>] ? process_one_work+0x207/0x4d1 > [ 2991.344562] [<ffffffff8105964c>] worker_thread+0x2e7/0x3b5 > [ 2991.344562] [<ffffffff81059365>] ? rescuer_thread+0x332/0x332 > [ 2991.344562] [<ffffffff81061cdb>] kthread+0xb1/0xb9 > [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] [<ffffffff8154c1dc>] ret_from_fork+0x7c/0xb0 > [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58 > [ 2991.344562] bash D ffffffff81a4aa80 0 2618 2612 0x10000000 > [ 2991.344562] ffff8800379abb58 0000000000000002 0000000000000006 0000000000000c2c > [ 2991.344562] ffff880077fea140 ffff8800379abfd8 ffff8800379abfd8 00000000001d3c80 > [ 2991.344562] ffff8800779ca5c0 ffff880077fea140 ffffffff81541fcf 0000000000000000 > [ 2991.344562] Call Trace: > [ 2991.344562] [<ffffffff81541fcf>] ? __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [<ffffffff815437ba>] schedule+0x64/0x66 > [ 2991.344562] [<ffffffff81543a39>] schedule_preempt_disabled+0x18/0x24 > [ 2991.344562] [<ffffffff81541fcf>] __mutex_lock_common+0x3d4/0x609 > [ 2991.344562] [<ffffffff81530078>] ? rcu_cpu_notify+0x2f5/0x86e > [ 2991.344562] [<ffffffff81530078>] ? rcu_cpu_notify+0x2f5/0x86e > [ 2991.344562] [<ffffffff815422ff>] mutex_lock_nested+0x3b/0x40 > [ 2991.344562] [<ffffffff81530078>] rcu_cpu_notify+0x2f5/0x86e > [ 2991.344562] [<ffffffff81091c99>] ? __lock_is_held+0x32/0x53 > [ 2991.344562] [<ffffffff81548912>] notifier_call_chain+0x6b/0x98 > [ 2991.344562] [<ffffffff810671fd>] __raw_notifier_call_chain+0xe/0x10 > [ 2991.344562] [<ffffffff8103cf64>] __cpu_notify+0x20/0x32 > [ 2991.344562] [<ffffffff8103cf8d>] cpu_notify_nofail+0x17/0x36 > [ 2991.344562] [<ffffffff815225de>] _cpu_down+0x154/0x259 > [ 2991.344562] [<ffffffff81522710>] cpu_down+0x2d/0x3a > [ 2991.344562] [<ffffffff81526351>] store_online+0x4e/0xe7 > [ 2991.344562] [<ffffffff8134d764>] dev_attr_store+0x20/0x22 > [ 2991.344562] [<ffffffff811b3c5f>] sysfs_write_file+0x108/0x144 > [ 2991.344562] [<ffffffff8114c5ef>] vfs_write+0xfd/0x158 > [ 2991.344562] [<ffffffff8114c928>] SyS_write+0x5c/0x83 > [ 2991.344562] [<ffffffff8154c494>] tracesys+0xdd/0xe2 > > As well as held locks: > > [ 3034.728033] Showing all locks held in the system: > [ 3034.728033] 1 lock held by rcu_preempt/10: > [ 3034.728033] #0: (rcu_preempt_state.onoff_mutex){+.+...}, at: [<ffffffff810c9471>] rcu_gp_kthread+0x167/0x94b > [ 3034.728033] 4 locks held by kworker/0:1/47: > [ 3034.728033] #0: (events){.+.+.+}, at: [<ffffffff81058d3a>] process_one_work+0x207/0x4d1 > [ 3034.728033] #1: (cpuset_hotplug_work){+.+.+.}, at: [<ffffffff81058d3a>] process_one_work+0x207/0x4d1 > [ 3034.728033] #2: (cpuset_mutex){+.+.+.}, at: [<ffffffff810b0ec1>] rebuild_sched_domains+0x17/0x2a > [ 3034.728033] #3: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8103d11b>] get_online_cpus+0x3c/0x50 > [ 3034.728033] 1 lock held by mingetty/2563: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2565: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2569: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2572: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8 > [ 3034.728033] 1 lock held by mingetty/2575: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8 > [ 3034.728033] 7 locks held by bash/2618: > [ 3034.728033] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff8114bc3f>] file_start_write+0x2a/0x2c > [ 3034.728033] #1: (&buffer->mutex#2){+.+.+.}, at: [<ffffffff811b3b93>] sysfs_write_file+0x3c/0x144 > [ 3034.728033] #2: (s_active#54){.+.+.+}, at: [<ffffffff811b3c3e>] sysfs_write_file+0xe7/0x144 > [ 3034.728033] #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff810217c2>] cpu_hotplug_driver_lock+0x17/0x19 > [ 3034.728033] #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8103d196>] cpu_maps_update_begin+0x17/0x19 > [ 3034.728033] #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8103cfd8>] cpu_hotplug_begin+0x2c/0x6d > [ 3034.728033] #6: (rcu_preempt_state.onoff_mutex){+.+...}, at: [<ffffffff81530078>] rcu_cpu_notify+0x2f5/0x86e > [ 3034.728033] 1 lock held by bash/2980: > [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8 > > Things looked a little weird. Also, this is a deadlock that lockdep did > not catch. But what we have here does not look like a circular lock > issue: > > Bash is blocked in rcu_cpu_notify(): > > 1961 /* Exclude any attempts to start a new grace period. */ > 1962 mutex_lock(&rsp->onoff_mutex); > > > kworker is blocked in get_online_cpus(), which makes sense as we are > currently taking down a CPU. > > But rcu_preempt is not blocked on anything. It is simply sleeping in > rcu_gp_kthread (really rcu_gp_init) here: > > 1453 #ifdef CONFIG_PROVE_RCU_DELAY > 1454 if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 && > 1455 system_state == SYSTEM_RUNNING) > 1456 schedule_timeout_uninterruptible(2); > 1457 #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */ > > And it does this while holding the onoff_mutex that bash is waiting for. > > Doing a function trace, it showed me where it happened: > > [ 125.940066] rcu_pree-10 3.... 28384115273: schedule_timeout_uninterruptible <-rcu_gp_kthread > [...] > [ 125.940066] rcu_pree-10 3d..3 28384202439: sched_switch: prev_comm=rcu_preempt prev_pid=10 prev_prio=120 prev_state=D ==> next_comm=watchdog/3 next_pid=38 next_prio=120 > > The watchdog ran, and then: > > [ 125.940066] watchdog-38 3d..3 28384692863: sched_switch: prev_comm=watchdog/3 prev_pid=38 prev_prio=120 prev_state=P ==> next_comm=modprobe next_pid=2848 next_prio=118 > > Not sure what modprobe was doing, but shortly after that: > > [ 125.940066] modprobe-2848 3d..3 28385041749: sched_switch: prev_comm=modprobe prev_pid=2848 prev_prio=118 prev_state=R+ ==> next_comm=migration/3 next_pid=40 next_prio=0 > > Where the migration thread took down the CPU: > > [ 125.940066] migratio-40 3d..3 28389148276: sched_switch: prev_comm=migration/3 prev_pid=40 prev_prio=0 prev_state=P ==> next_comm=swapper/3 next_pid=0 next_prio=120 > > which finally did: > > [ 125.940066] <idle>-0 3...1 28389282142: arch_cpu_idle_dead <-cpu_startup_entry > [ 125.940066] <idle>-0 3...1 28389282548: native_play_dead <-arch_cpu_idle_dead > [ 125.940066] <idle>-0 3...1 28389282924: play_dead_common <-native_play_dead > [ 125.940066] <idle>-0 3...1 28389283468: idle_task_exit <-play_dead_common > [ 125.940066] <idle>-0 3...1 28389284644: amd_e400_remove_cpu <-play_dead_common > > > CPU 3 is now offline, the rcu_preempt thread that ran on CPU 3 is still > doing a schedule_timeout_uninterruptible() and it registered it's > timeout to the timer base for CPU 3. You would think that it would get > migrated right? The issue here is that the timer migration happens at > the CPU notifier for CPU_DEAD. The problem is that the rcu notifier for > CPU_DOWN is blocked waiting for the onoff_mutex to be released, which is > held by the thread that just put itself into a uninterruptible sleep, > that wont wake up until the CPU_DEAD notifier of the timer > infrastructure is called, which wont happen until the rcu notifier > finishes. Here's our deadlock! This commit breaks this deadlock cycle by substituting a shorter udelay() for the previous schedule_timeout_uninterruptible(), while at the same time increasing the probability of the delay. This maintains the intensity of the testing. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Steven Rostedt <rostedt@goodmis.org>

When running the LTP testsuite one may hit this kernel BUG() with the write06 testcase: kernel BUG at mm/filemap.c:2023! CPU: 1 PID: 8614 Comm: writev01 Not tainted 3.10.0-rc7-64bit-c3000+ #6 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401e6e84 00000000401e6e88 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001fbe0380820 CPU: 1 CR30: 00000000bef80000 CR31: ffffffffffffffff ORIG_R28: 00000000bdc192c0 IAOQ[0]: iov_iter_advance+0x3c/0xc0 IAOQ[1]: iov_iter_advance+0x40/0xc0 RP(r2): generic_file_buffered_write+0x204/0x3f0 Backtrace: [<00000000401e764c>] generic_file_buffered_write+0x204/0x3f0 [<00000000401eab24>] __generic_file_aio_write+0x244/0x448 [<00000000401eadc0>] generic_file_aio_write+0x98/0x150 [<000000004024f460>] do_sync_readv_writev+0xc0/0x130 [<000000004025037c>] compat_do_readv_writev+0x12c/0x340 [<00000000402505f8>] compat_writev+0x68/0xa0 [<0000000040251d88>] compat_SyS_writev+0x98/0xf8 Reason for this crash is a gcc miscompilation in the fault handlers of pa_memcpy() which return the fault address instead of the copied bytes. Since this seems to be a generic problem with gcc-4.7.x (and below), it's better to simplify the fault handlers in pa_memcpy to avoid this problem. Here is a simple reproducer for the problem: int main(int argc, char **argv) { int fd, nbytes; struct iovec wr_iovec[] = { { "TEST STRING ",32}, { (char*)0x40005000,32} }; // random memory. fd = open(DATA_FILE, O_RDWR | O_CREAT, 0666); nbytes = writev(fd, wr_iovec, 2); printf("return value = %d, errno %d (%s)\n", nbytes, errno, strerror(errno)); return 0; } In addition, John David Anglin wrote: There is no gcc PR as pa_memcpy is not legitimate C code. There is an implicit assumption that certain variables will contain correct values when an exception occurs and the code randomly jumps to one of the exception blocks. There is no guarantee of this. If a PR was filed, it would likely be marked as invalid. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-by: Helge Deller <deller@gmx.de>

commit 5b879d7 upstream. When running the LTP testsuite one may hit this kernel BUG() with the write06 testcase: kernel BUG at mm/filemap.c:2023! CPU: 1 PID: 8614 Comm: writev01 Not tainted 3.10.0-rc7-64bit-c3000+ #6 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401e6e84 00000000401e6e88 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001fbe0380820 CPU: 1 CR30: 00000000bef80000 CR31: ffffffffffffffff ORIG_R28: 00000000bdc192c0 IAOQ[0]: iov_iter_advance+0x3c/0xc0 IAOQ[1]: iov_iter_advance+0x40/0xc0 RP(r2): generic_file_buffered_write+0x204/0x3f0 Backtrace: [<00000000401e764c>] generic_file_buffered_write+0x204/0x3f0 [<00000000401eab24>] __generic_file_aio_write+0x244/0x448 [<00000000401eadc0>] generic_file_aio_write+0x98/0x150 [<000000004024f460>] do_sync_readv_writev+0xc0/0x130 [<000000004025037c>] compat_do_readv_writev+0x12c/0x340 [<00000000402505f8>] compat_writev+0x68/0xa0 [<0000000040251d88>] compat_SyS_writev+0x98/0xf8 Reason for this crash is a gcc miscompilation in the fault handlers of pa_memcpy() which return the fault address instead of the copied bytes. Since this seems to be a generic problem with gcc-4.7.x (and below), it's better to simplify the fault handlers in pa_memcpy to avoid this problem. Here is a simple reproducer for the problem: int main(int argc, char **argv) { int fd, nbytes; struct iovec wr_iovec[] = { { "TEST STRING ",32}, { (char*)0x40005000,32} }; // random memory. fd = open(DATA_FILE, O_RDWR | O_CREAT, 0666); nbytes = writev(fd, wr_iovec, 2); printf("return value = %d, errno %d (%s)\n", nbytes, errno, strerror(errno)); return 0; } In addition, John David Anglin wrote: There is no gcc PR as pa_memcpy is not legitimate C code. There is an implicit assumption that certain variables will contain correct values when an exception occurs and the code randomly jumps to one of the exception blocks. There is no guarantee of this. If a PR was filed, it would likely be marked as invalid. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

@fn

If the @fn call work_on_cpu() again, the lockdep will complain: > [ INFO: possible recursive locking detected ] > 3.11.0-rc1-lockdep-fix-a #6 Not tainted > --------------------------------------------- > kworker/0:1/142 is trying to acquire lock: > ((&wfc.work)){+.+.+.}, at: [<ffffffff81077100>] flush_work+0x0/0xb0 > > but task is already holding lock: > ((&wfc.work)){+.+.+.}, at: [<ffffffff81075dd9>] process_one_work+0x169/0x610 > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock((&wfc.work)); > lock((&wfc.work)); > > *** DEADLOCK *** It is false-positive lockdep report. In this sutiation, the two "wfc"s of the two work_on_cpu() are different, they are both on stack. flush_work() can't be deadlock. To fix this, we need to avoid the lockdep checking in this case, thus we instroduce a internal __flush_work() which skip the lockdep. tj: Minor comment adjustment. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Reported-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Reported-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>

commit 5b879d7 upstream. When running the LTP testsuite one may hit this kernel BUG() with the write06 testcase: kernel BUG at mm/filemap.c:2023! CPU: 1 PID: 8614 Comm: writev01 Not tainted 3.10.0-rc7-64bit-c3000+ hardkernel#6 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401e6e84 00000000401e6e88 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001fbe0380820 CPU: 1 CR30: 00000000bef80000 CR31: ffffffffffffffff ORIG_R28: 00000000bdc192c0 IAOQ[0]: iov_iter_advance+0x3c/0xc0 IAOQ[1]: iov_iter_advance+0x40/0xc0 RP(r2): generic_file_buffered_write+0x204/0x3f0 Backtrace: [<00000000401e764c>] generic_file_buffered_write+0x204/0x3f0 [<00000000401eab24>] __generic_file_aio_write+0x244/0x448 [<00000000401eadc0>] generic_file_aio_write+0x98/0x150 [<000000004024f460>] do_sync_readv_writev+0xc0/0x130 [<000000004025037c>] compat_do_readv_writev+0x12c/0x340 [<00000000402505f8>] compat_writev+0x68/0xa0 [<0000000040251d88>] compat_SyS_writev+0x98/0xf8 Reason for this crash is a gcc miscompilation in the fault handlers of pa_memcpy() which return the fault address instead of the copied bytes. Since this seems to be a generic problem with gcc-4.7.x (and below), it's better to simplify the fault handlers in pa_memcpy to avoid this problem. Here is a simple reproducer for the problem: int main(int argc, char **argv) { int fd, nbytes; struct iovec wr_iovec[] = { { "TEST STRING ",32}, { (char*)0x40005000,32} }; // random memory. fd = open(DATA_FILE, O_RDWR | O_CREAT, 0666); nbytes = writev(fd, wr_iovec, 2); printf("return value = %d, errno %d (%s)\n", nbytes, errno, strerror(errno)); return 0; } In addition, John David Anglin wrote: There is no gcc PR as pa_memcpy is not legitimate C code. There is an implicit assumption that certain variables will contain correct values when an exception occurs and the code randomly jumps to one of the exception blocks. There is no guarantee of this. If a PR was filed, it would likely be marked as invalid. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea3768b upstream. We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60 [<ffffffff812734b4>] ? kobject_add+0x44/0x70 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0 [<ffffffff8134b389>] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b hardkernel#1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 hardkernel#2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 hardkernel#3 [ffff88011b9d5bf0] die at ffffffff8100f26b hardkernel#4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 hardkernel#5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 hardkernel#6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d hardkernel#7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 hardkernel#8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb hardkernel#9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. Reported-by: chayang <chayang@redhat.com> Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com> Reported-by: FuXiangChun <xfu@redhat.com> Reported-by: Qunfang Zhang <qzhang@redhat.com> Reported-by: Sibiao Luo <sluo@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 346ece0 upstream. Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [<ffffffff815a65e0>] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9f "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Tested-by: Dmitry Khromov <icechrome@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit ea3768b upstream. We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60 [<ffffffff812734b4>] ? kobject_add+0x44/0x70 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0 [<ffffffff8134b389>] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb #9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. Reported-by: chayang <chayang@redhat.com> Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com> Reported-by: FuXiangChun <xfu@redhat.com> Reported-by: Qunfang Zhang <qzhang@redhat.com> Reported-by: Sibiao Luo <sluo@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commits 6a1c068 and 9356b53, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In several places, this snippet is used when removing neigh entries: list_del(&neigh->list); ipoib_neigh_free(neigh); The list_del() removes neigh from the associated struct ipoib_path, while ipoib_neigh_free() removes neigh from the device's neigh entry lookup table. Both of these operations are protected by the priv->lock spinlock. The table however is also protected via RCU, and so naturally the lock is not held when doing reads. This leads to a race condition, in which a thread may successfully look up a neigh entry that has already been deleted from neigh->list. Since the previous deletion will have marked the entry with poison, a second list_del() on the object will cause a panic: #5 [ffff8802338c3c70] general_protection at ffffffff815108c5 [exception RIP: list_del+16] RIP: ffffffff81289020 RSP: ffff8802338c3d20 RFLAGS: 00010082 RAX: dead000000200200 RBX: ffff880433e60c88 RCX: 0000000000009e6c RDX: 0000000000000246 RSI: ffff8806012ca298 RDI: ffff880433e60c88 RBP: ffff8802338c3d30 R8: ffff8806012ca2e8 R9: 00000000ffffffff R10: 0000000000000001 R11: 0000000000000000 R12: ffff8804346b2020 R13: ffff88032a3e7540 R14: ffff8804346b26e0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 #6 [ffff8802338c3d38] ipoib_cm_tx_handler at ffffffffa066fe0a [ib_ipoib] #7 [ffff8802338c3d98] cm_process_work at ffffffffa05149a7 [ib_cm] #8 [ffff8802338c3de8] cm_work_handler at ffffffffa05161aa [ib_cm] #9 [ffff8802338c3e38] worker_thread at ffffffff81090e10 #10 [ffff8802338c3ee8] kthread at ffffffff81096c66 #11 [ffff8802338c3f48] kernel_thread at ffffffff8100c0ca We move the list_del() into ipoib_neigh_free(), so that deletion happens only once, after the entry has been successfully removed from the lookup table. This same behavior is already used in ipoib_del_neighs_by_gid() and __ipoib_reap_neigh(). Signed-off-by: Jim Foraker <foraker1@llnl.gov> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

When parsing lines from objdump a line containing source code starting with a numeric label is mistaken for a line of disassembly starting with a memory address. Current validation fails to recognise that the "memory address" is out of range and calculates an invalid offset which later causes this segfault: Program received signal SIGSEGV, Segmentation fault. 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 631 hits += h->addr[offset++]; (gdb) bt #0 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 #1 0x00000000004d65e3 in annotate_browser__calc_percent (browser=0x7fffffffd130, evsel=0xa01da0) at ui/browsers/annotate.c:364 #2 0x00000000004d7433 in annotate_browser__run (browser=0x7fffffffd130, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:672 #3 0x00000000004d80c9 in symbol__tui_annotate (sym=0xc989a0, map=0xa02660, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:962 #4 0x00000000004d7aa0 in hist_entry__tui_annotate (he=0xdf73f0, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:823 #5 0x00000000004dd648 in perf_evsel__hists_browse (evsel=0xa01da0, nr_events=1, helpline= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", ev_name=0xa02cd0 "cycles", left_exits=false, hbt= 0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1659 #6 0x00000000004de372 in perf_evlist__tui_browse_hists (evlist=0xa01520, help= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", hbt=0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1950 #7 0x000000000042cf6b in __cmd_report (rep=0x7fffffffd6c0) at builtin-report.c:581 #8 0x000000000042e25d in cmd_report (argc=0, argv=0x7fffffffe4b0, prefix=0x0) at builtin-report.c:965 #9 0x000000000041a0e1 in run_builtin (p=0x801548, argc=1, argv=0x7fffffffe4b0) at perf.c:319 #10 0x000000000041a319 in handle_internal_command (argc=1, argv=0x7fffffffe4b0) at perf.c:376 #11 0x000000000041a465 in run_argv (argcp=0x7fffffffe38c, argv=0x7fffffffe380) at perf.c:420 #12 0x000000000041a707 in main (argc=1, argv=0x7fffffffe4b0) at perf.c:521 After the fix is applied the symbol can be annotated showing the problematic line "1: rep" copy_user_generic_string /usr/lib/debug/lib/modules/3.9.10-100.fc17.x86_64/vmlinux */ ENTRY(copy_user_generic_string) CFI_STARTPROC ASM_STAC andl %edx,%edx and %edx,%edx jz 4f je 37 cmpl $8,%edx cmp $0x8,%edx jb 2f /* less than 8 bytes, go to byte copy loop */ jb 33 ALIGN_DESTINATION mov %edi,%ecx and $0x7,%ecx je 28 sub $0x8,%ecx neg %ecx sub %ecx,%edx 1a: mov (%rsi),%al mov %al,(%rdi) inc %rsi inc %rdi dec %ecx jne 1a movl %edx,%ecx 28: mov %edx,%ecx shrl $3,%ecx shr $0x3,%ecx andl $7,%edx and $0x7,%edx 1: rep 100.00 rep movsq %ds:(%rsi),%es:(%rdi) movsq 2: movl %edx,%ecx 33: mov %edx,%ecx 3: rep rep movsb %ds:(%rsi),%es:(%rdi) movsb 4: xorl %eax,%eax 37: xor %eax,%eax data32 xchg %ax,%ax ASM_CLAC ret retq Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1379009721-27667-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [<ffffffff815a65e0>] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9f "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by: Dmitry Khromov <icechrome@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit d16933b "i2c: s3c2410: Move location of clk_prepare_enable() call in probe function" refactored clk_enable and clk_disable calls yet neglected to remove the clk_disable_unprepare call in the module's remove(). It helps remove warnings on an arndale during unbind: echo 12c90000.i2c > /sys/bus/platform/devices/12c90000.i2c/driver/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:842 clk_disable+0x18/0x24() Modules linked in: CPU: 0 PID: 2548 Comm: bash Not tainted 3.11.0-next-20130916-00003-gf4bddbc #6 [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14) [<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac) [<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88) [<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c4a64>] (clk_disable+0x18/0x24) [<c02c4a64>] (clk_disable+0x18/0x24) from [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c) [<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4) [<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28) [<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90) [<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c) [<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198) [<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194) [<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70) [<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30) ---[ end trace 4c9f9403066f57a6 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:751 clk_unprepare+0x14/0x1c() Modules linked in: CPU: 0 PID: 2548 Comm: bash Tainted: G W 3.11.0-next-20130916-00003-gf4bddbc #6 [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14) [<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac) [<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88) [<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c5834>] (clk_unprepare+0x14/0x1c) [<c02c5834>] (clk_unprepare+0x14/0x1c) from [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c) [<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4) [<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28) [<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90) [<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c) [<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198) [<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194) [<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70) [<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30) ---[ end trace 4c9f9403066f57a7 ]--- Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Michael Semon reported that xfs/299 generated this lockdep warning: ============================================= [ INFO: possible recursive locking detected ] 3.12.0-rc2+ #2 Not tainted --------------------------------------------- touch/21072 is trying to acquire lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 but task is already holding lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xfs_dquot_other_class); lock(&xfs_dquot_other_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by touch/21072: #0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e #1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40 #2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35 #3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1 #4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f #5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 #6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 The lockdep annotation for dquot lock nesting only understands locking for user and "other" dquots, not user, group and quota dquots. Fix the annotations to match the locking heirarchy we now have. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit f112a04)

As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.644008] smpboot: Booting Node 1, Processors: #8 #9 #10 #11 #12 #13 #14 #15 OK [ 1.245006] smpboot: Booting Node 2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK [ 1.864005] smpboot: Booting Node 3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK [ 2.489005] smpboot: Booting Node 4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK [ 3.093005] smpboot: Booting Node 5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK [ 3.698005] smpboot: Booting Node 6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK [ 4.304005] smpboot: Booting Node 7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Michael Semon reported that xfs/299 generated this lockdep warning: ============================================= [ INFO: possible recursive locking detected ] 3.12.0-rc2+ #2 Not tainted --------------------------------------------- touch/21072 is trying to acquire lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 but task is already holding lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xfs_dquot_other_class); lock(&xfs_dquot_other_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by touch/21072: #0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e #1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40 #2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35 #3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1 #4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f #5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 #6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 The lockdep annotation for dquot lock nesting only understands locking for user and "other" dquots, not user, group and quota dquots. Fix the annotations to match the locking heirarchy we now have. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.603005] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.200005] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 1.796005] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.393005] .... node #4, CPUs: #32 #33 #34 #35 #36 #37 #38 #39 [ 2.996005] .... node #5, CPUs: #40 #41 #42 #43 #44 #45 #46 #47 [ 3.600005] .... node #6, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 [ 4.202005] .... node #7, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 [ 4.811005] .... node #8, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 [ 5.421006] .... node #9, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 [ 6.032005] .... node #10, CPUs: #80 #81 #82 #83 #84 #85 #86 #87 [ 6.648006] .... node #11, CPUs: #88 #89 #90 #91 #92 #93 #94 #95 [ 7.262005] .... node #12, CPUs: #96 #97 #98 #99 #100 #101 #102 #103 [ 7.865005] .... node #13, CPUs: #104 #105 #106 #107 #108 #109 #110 #111 [ 8.466005] .... node #14, CPUs: #112 #113 #114 #115 #116 #117 #118 #119 [ 9.073006] .... node #15, CPUs: #120 #121 #122 #123 #124 #125 #126 #127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Andrey reported the following report: ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3 ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3) Accessed by thread T13003: #0 ffffffff810dd2da (asan_report_error+0x32a/0x440) #1 ffffffff810dc6b0 (asan_check_region+0x30/0x40) #2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20) #3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260) #4 ffffffff812a1065 (__fput+0x155/0x360) #5 ffffffff812a12de (____fput+0x1e/0x30) #6 ffffffff8111708d (task_work_run+0x10d/0x140) #7 ffffffff810ea043 (do_exit+0x433/0x11f0) #8 ffffffff810eaee4 (do_group_exit+0x84/0x130) #9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30) #10 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Allocated by thread T5167: #0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0) #1 ffffffff8128337c (__kmalloc+0xbc/0x500) #2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90) #3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0) #4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40) #5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430) #6 ffffffff8129b668 (finish_open+0x68/0xa0) #7 ffffffff812b66ac (do_last+0xb8c/0x1710) #8 ffffffff812b7350 (path_openat+0x120/0xb50) #9 ffffffff812b8884 (do_filp_open+0x54/0xb0) #10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0) #11 ffffffff8129d4b7 (SyS_open+0x37/0x50) #12 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Shadow bytes around the buggy address: ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap redzone: fa Heap kmalloc redzone: fb Freed heap region: fd Shadow gap: fe The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;' Although the crash happened in ftrace_regex_open() the real bug occurred in trace_get_user() where there's an incrementation to parser->idx without a check against the size. The way it is triggered is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop that reads the last character stores it and then breaks out because there is no more characters. Then the last character is read to determine what to do next, and the index is incremented without checking size. Then the caller of trace_get_user() usually nulls out the last character with a zero, but since the index is equal to the size, it writes a nul character after the allocated space, which can corrupt memory. Luckily, only root user has write access to this file. Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>

…ux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "Two changes that prettify and compactify the SMP bootup output from: smpboot: Booting Node 0, Processors #1 #2 #3 OK smpboot: Booting Node 1, Processors #4 #5 #6 #7 OK smpboot: Booting Node 2, Processors #8 #9 #10 #11 OK smpboot: Booting Node 3, Processors #12 #13 #14 #15 OK Brought up 16 CPUs to something like: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 .... node #1, CPUs: #4 #5 #6 #7 .... node #2, CPUs: #8 #9 #10 #11 .... node #3, CPUs: #12 #13 #14 #15 x86: Booted up 4 nodes, 16 CPUs" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Further compress CPUs bootup message x86: Improve the printout of the SMP bootup CPU table

commit 346ece0 upstream. Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [<ffffffff815a65e0>] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9f "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Tested-by: Dmitry Khromov <icechrome@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 057db84 upstream. Andrey reported the following report: ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3 ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3) Accessed by thread T13003: #0 ffffffff810dd2da (asan_report_error+0x32a/0x440) #1 ffffffff810dc6b0 (asan_check_region+0x30/0x40) #2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20) #3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260) #4 ffffffff812a1065 (__fput+0x155/0x360) #5 ffffffff812a12de (____fput+0x1e/0x30) #6 ffffffff8111708d (task_work_run+0x10d/0x140) #7 ffffffff810ea043 (do_exit+0x433/0x11f0) #8 ffffffff810eaee4 (do_group_exit+0x84/0x130) #9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30) #10 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Allocated by thread T5167: #0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0) #1 ffffffff8128337c (__kmalloc+0xbc/0x500) #2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90) #3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0) #4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40) #5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430) #6 ffffffff8129b668 (finish_open+0x68/0xa0) #7 ffffffff812b66ac (do_last+0xb8c/0x1710) #8 ffffffff812b7350 (path_openat+0x120/0xb50) #9 ffffffff812b8884 (do_filp_open+0x54/0xb0) #10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0) #11 ffffffff8129d4b7 (SyS_open+0x37/0x50) #12 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Shadow bytes around the buggy address: ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap redzone: fa Heap kmalloc redzone: fb Freed heap region: fd Shadow gap: fe The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;' Although the crash happened in ftrace_regex_open() the real bug occurred in trace_get_user() where there's an incrementation to parser->idx without a check against the size. The way it is triggered is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop that reads the last character stores it and then breaks out because there is no more characters. Then the last character is read to determine what to do next, and the index is incremented without checking size. Then the caller of trace_get_user() usually nulls out the last character with a zero, but since the index is equal to the size, it writes a nul character after the allocated space, which can corrupt memory. Luckily, only root user has write access to this file. Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…culation Currently mx53 (CortexA8) running at 1GHz reports: Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760) Tom Evans verified that alignments of 0x0 and 0x8 run the two instructions of __loop_delay in one clock cycle (1 clock/loop), while alignments of 0x4 and 0xc take 3 clocks to run the loop twice. (1.5 clock/loop) The original object code looks like this: 00000010 <__loop_const_udelay>: 10: e3e01000 mvn r1, #0 14: e51f201c ldr r2, [pc, #-28] ; 0 <__loop_udelay-0x8> 18: e5922000 ldr r2, [r2] 1c: e0800921 add r0, r0, r1, lsr #18 20: e1a00720 lsr r0, r0, #14 24: e0822b21 add r2, r2, r1, lsr #22 28: e1a02522 lsr r2, r2, #10 2c: e0000092 mul r0, r2, r0 30: e0800d21 add r0, r0, r1, lsr #26 34: e1b00320 lsrs r0, r0, #6 38: 01a0f00e moveq pc, lr 0000003c <__loop_delay>: 3c: e2500001 subs r0, r0, #1 40: 8afffffe bhi 3c <__loop_delay> 44: e1a0f00e mov pc, lr After adding the 'align 3' directive to __loop_delay (align to 8 bytes): 00000010 <__loop_const_udelay>: 10: e3e01000 mvn r1, #0 14: e51f201c ldr r2, [pc, #-28] ; 0 <__loop_udelay-0x8> 18: e5922000 ldr r2, [r2] 1c: e0800921 add r0, r0, r1, lsr #18 20: e1a00720 lsr r0, r0, #14 24: e0822b21 add r2, r2, r1, lsr #22 28: e1a02522 lsr r2, r2, #10 2c: e0000092 mul r0, r2, r0 30: e0800d21 add r0, r0, r1, lsr #26 34: e1b00320 lsrs r0, r0, #6 38: 01a0f00e moveq pc, lr 3c: e320f000 nop {0} 00000040 <__loop_delay>: 40: e2500001 subs r0, r0, #1 44: 8afffffe bhi 40 <__loop_delay> 48: e1a0f00e mov pc, lr 4c: e320f000 nop {0} , which now reports: Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) Some more test results: On mx31 (ARM1136) running at 532 MHz, before the patch: Calibrating delay loop... 351.43 BogoMIPS (lpj=1757184) On mx31 (ARM1136) running at 532 MHz after the patch: Calibrating delay loop... 528.79 BogoMIPS (lpj=2643968) Also tested on mx6 (CortexA9) and on mx27 (ARM926), which shows the same BogoMIPS value before and after this patch. Reported-by: Tom Evans <tom_usenet@optusnet.com.au> Suggested-by: Tom Evans <tom_usenet@optusnet.com.au> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

With power savings (CONFIG_SND_HDA_POWER_SAVE) enabled the EAPD GPIO de-asserts prior to proper biasing of the speaker inputs into the external amplifier causing a 'pop'. Delaying EAPD by 25ms provides necessary setup time to avoid the pop. BUG=chrome-os-partner:3971 TEST=manual, see tracker re:hardkernel#6 for Change-Id: I7f6a57ebf65ef42df47250772df29d383ff4892e Signed-off-by: Todd Broch <tbroch@chromium.org> Reviewed-on: http://gerrit.chromium.org/gerrit/1316 Reviewed-by: Mark Hayter <mdhayter@chromium.org> Reviewed-by: Olof Johansson <olofj@chromium.org>

Hayes Wang says: ==================== support new chip Remove the trailing "/* CRC */" for patch #3. Change the return value type of rtl_ops_init() from int to boolean for patch #4. Replace VENDOR_ID_SAMSUNG with SAMSUNG_VENDOR_ID for patch #6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

When we pull a received packet from a link's 'deferred packets' queue for processing, its 'next' pointer is not cleared, and still refers to the next packet in that queue, if any. This is incorrect, but caused no harm before commit 40ba3cd ("tipc: message reassembly using fragment chain") was introduced. After that commit, it may sometimes lead to the following oops: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: tipc CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W 3.13.0-rc2+ #6 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880017af4880 ti: ffff880017aee000 task.ti: ffff880017aee000 RIP: 0010:[<ffffffff81710694>] [<ffffffff81710694>] skb_try_coalesce+0x44/0x3d0 RSP: 0018:ffff880016603a78 EFLAGS: 00010212 RAX: 6b6b6b6bd6d6d6d6 RBX: ffff880013106ac0 RCX: ffff880016603ad0 RDX: ffff880016603ad7 RSI: ffff88001223ed00 RDI: ffff880013106ac0 RBP: ffff880016603ab8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88001223ed00 R13: ffff880016603ad0 R14: 000000000000058c R15: ffff880012297650 FS: 0000000000000000(0000) GS:ffff880016600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000805b000 CR3: 0000000011f5d000 CR4: 00000000000006e0 Stack: ffff880016603a88 ffffffff810a38ed ffff880016603aa8 ffff88001223ed00 0000000000000001 ffff880012297648 ffff880016603b68 ffff880012297650 ffff880016603b08 ffffffffa0006c51 ffff880016603b08 00ffffffa00005fc Call Trace: <IRQ> [<ffffffff810a38ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa0006c51>] tipc_link_recv_fragment+0xd1/0x1b0 [tipc] [<ffffffffa0007214>] tipc_recv_msg+0x4e4/0x920 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffffa000177c>] tipc_l2_rcv_msg+0xcc/0x250 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffff8171e65b>] __netif_receive_skb_core+0x80b/0xd00 [<ffffffff8171df94>] ? __netif_receive_skb_core+0x144/0xd00 [<ffffffff8171eb76>] __netif_receive_skb+0x26/0x70 [<ffffffff8171ed6d>] netif_receive_skb+0x2d/0x200 [<ffffffff8171fe70>] napi_gro_receive+0xb0/0x130 [<ffffffff815647c2>] e1000_clean_rx_irq+0x2c2/0x530 [<ffffffff81565986>] e1000_clean+0x266/0x9c0 [<ffffffff81985f7b>] ? notifier_call_chain+0x2b/0x160 [<ffffffff8171f971>] net_rx_action+0x141/0x310 [<ffffffff81051c1b>] __do_softirq+0xeb/0x480 [<ffffffff819817bb>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810b8c42>] ? handle_fasteoi_irq+0x72/0x100 [<ffffffff81052346>] irq_exit+0x96/0xc0 [<ffffffff8198cbc3>] do_IRQ+0x63/0xe0 [<ffffffff81981def>] common_interrupt+0x6f/0x6f <EOI> This happens when the last fragment of a message has passed through the the receiving link's 'deferred packets' queue, and at least one other packet was added to that queue while it was there. After the fragment chain with the complete message has been successfully delivered to the receiving socket, it is released. Since 'next' pointer of the last fragment in the released chain now is non-NULL, we get the crash shown above. We fix this by clearing the 'next' pointer of all received packets, including those being pulled from the 'deferred' queue, before they undergo any further processing. Fixes: 40ba3cd ("tipc: message reassembly using fragment chain") Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>

commit 2172fa7 upstream. Setting an empty security context (length=0) on a file will lead to incorrectly dereferencing the type and other fields of the security context structure, yielding a kernel BUG. As a zero-length security context is never valid, just reject all such security contexts whether coming from userspace via setxattr or coming from the filesystem upon a getxattr request by SELinux. Setting a security context value (empty or otherwise) unknown to SELinux in the first place is only possible for a root process (CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only if the corresponding SELinux mac_admin permission is also granted to the domain by policy. In Fedora policies, this is only allowed for specific domains such as livecd for setting down security contexts that are not defined in the build host policy. Reproducer: su setenforce 0 touch foo setfattr -n security.selinux foo Caveat: Relabeling or removing foo after doing the above may not be possible without booting with SELinux disabled. Any subsequent access to foo after doing the above will also trigger the BUG. BUG output from Matthew Thode: [ 473.893141] ------------[ cut here ]------------ [ 473.962110] kernel BUG at security/selinux/ss/services.c:654! [ 473.995314] invalid opcode: 0000 [#6] SMP [ 474.027196] Modules linked in: [ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I 3.13.0-grsec #1 [ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti: ffff8805f50cd488 [ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246 [ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX: 0000000000000100 [ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI: ffff8805e8aaa000 [ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09: 0000000000000006 [ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12: 0000000000000006 [ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15: 0000000000000000 [ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000) knlGS:0000000000000000 [ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4: 00000000000207f0 [ 474.556058] Stack: [ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98 ffff8805f1190a40 [ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990 ffff8805e8aac860 [ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060 ffff8805c0ac3d94 [ 474.690461] Call Trace: [ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a [ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b [ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179 [ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4 [ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31 [ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e [ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22 [ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d [ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91 [ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b [ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30 [ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3 [ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b [ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48 8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7 75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8 [ 475.255884] RIP [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 475.296120] RSP <ffff8805c0ac3c38> [ 475.328734] ---[ end trace f076482e9d754adc ]--- Reported-by: Matthew Thode <mthode@mthode.org> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d25f06e upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2172fa7 upstream. Setting an empty security context (length=0) on a file will lead to incorrectly dereferencing the type and other fields of the security context structure, yielding a kernel BUG. As a zero-length security context is never valid, just reject all such security contexts whether coming from userspace via setxattr or coming from the filesystem upon a getxattr request by SELinux. Setting a security context value (empty or otherwise) unknown to SELinux in the first place is only possible for a root process (CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only if the corresponding SELinux mac_admin permission is also granted to the domain by policy. In Fedora policies, this is only allowed for specific domains such as livecd for setting down security contexts that are not defined in the build host policy. Reproducer: su setenforce 0 touch foo setfattr -n security.selinux foo Caveat: Relabeling or removing foo after doing the above may not be possible without booting with SELinux disabled. Any subsequent access to foo after doing the above will also trigger the BUG. BUG output from Matthew Thode: [ 473.893141] ------------[ cut here ]------------ [ 473.962110] kernel BUG at security/selinux/ss/services.c:654! [ 473.995314] invalid opcode: 0000 [#6] SMP [ 474.027196] Modules linked in: [ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I 3.13.0-grsec #1 [ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti: ffff8805f50cd488 [ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246 [ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX: 0000000000000100 [ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI: ffff8805e8aaa000 [ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09: 0000000000000006 [ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12: 0000000000000006 [ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15: 0000000000000000 [ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000) knlGS:0000000000000000 [ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4: 00000000000207f0 [ 474.556058] Stack: [ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98 ffff8805f1190a40 [ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990 ffff8805e8aac860 [ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060 ffff8805c0ac3d94 [ 474.690461] Call Trace: [ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a [ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b [ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179 [ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4 [ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31 [ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e [ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22 [ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d [ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91 [ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b [ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30 [ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3 [ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b [ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48 8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7 75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8 [ 475.255884] RIP [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 475.296120] RSP <ffff8805c0ac3c38> [ 475.328734] ---[ end trace f076482e9d754adc ]--- Reported-by: Matthew Thode <mthode@mthode.org> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

This patch should resolve the following bug. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.13.0-rc5.f2fs+ hardkernel#6 Not tainted --------------------------------------------------------- kswapd0/41 just changed the state of lock: (&sbi->gc_mutex){+.+.-.}, at: [<ffffffffa030503e>] f2fs_balance_fs+0xae/0xd0 [f2fs] but this lock took another, RECLAIM_FS-READ-unsafe lock in the past: (&sbi->cp_rwsem){++++.?} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Chain exists of: &sbi->gc_mutex --> &sbi->cp_mutex --> &sbi->cp_rwsem Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->cp_rwsem); local_irq_disable(); lock(&sbi->gc_mutex); lock(&sbi->cp_mutex); <Interrupt> lock(&sbi->gc_mutex); *** DEADLOCK *** This bug is due to the f2fs_balance_fs call in f2fs_write_data_page. If f2fs_write_data_page is triggered by wbc->for_reclaim via kswapd, it should not call f2fs_balance_fs which tries to get a mutex grabbed by original syscall flow. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Setting an empty security context (length=0) on a file will lead to incorrectly dereferencing the type and other fields of the security context structure, yielding a kernel BUG. As a zero-length security context is never valid, just reject all such security contexts whether coming from userspace via setxattr or coming from the filesystem upon a getxattr request by SELinux. Setting a security context value (empty or otherwise) unknown to SELinux in the first place is only possible for a root process (CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only if the corresponding SELinux mac_admin permission is also granted to the domain by policy. In Fedora policies, this is only allowed for specific domains such as livecd for setting down security contexts that are not defined in the build host policy. Reproducer: su setenforce 0 touch foo setfattr -n security.selinux foo Caveat: Relabeling or removing foo after doing the above may not be possible without booting with SELinux disabled. Any subsequent access to foo after doing the above will also trigger the BUG. BUG output from Matthew Thode: [ 473.893141] ------------[ cut here ]------------ [ 473.962110] kernel BUG at security/selinux/ss/services.c:654! [ 473.995314] invalid opcode: 0000 [hardkernel#6] SMP [ 474.027196] Modules linked in: [ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I 3.13.0-grsec hardkernel#1 [ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti: ffff8805f50cd488 [ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246 [ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX: 0000000000000100 [ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI: ffff8805e8aaa000 [ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09: 0000000000000006 [ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12: 0000000000000006 [ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15: 0000000000000000 [ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000) knlGS:0000000000000000 [ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4: 00000000000207f0 [ 474.556058] Stack: [ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98 ffff8805f1190a40 [ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990 ffff8805e8aac860 [ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060 ffff8805c0ac3d94 [ 474.690461] Call Trace: [ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a [ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b [ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179 [ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4 [ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31 [ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e [ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22 [ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d [ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91 [ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b [ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30 [ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3 [ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b [ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48 8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7 75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8 [ 475.255884] RIP [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 475.296120] RSP <ffff8805c0ac3c38> [ 475.328734] ---[ end trace f076482e9d754adc ]--- Reported-by: Matthew Thode <mthode@mthode.org> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>

rzk added 2 commits January 7, 2013 01:45

block: fix "BUG: using smp_processor_id() in preemptible code"

7c12e01

Source https://lkml.org/lkml/2011/7/26/6 Patch by Ming Lei

mali: fix build error.

ab10080

hardkernel added a commit that referenced this pull request Jan 8, 2013

Merge pull request #6 from rzk/odroid-3.0.y

fb06315

Mali-400 build and usage of SMP code in preemptible code fixes.

hardkernel merged commit fb06315 into hardkernel:odroid-3.0.y Jan 8, 2013

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Mali-400 build and usage of SMP code in preemptible code fixes.#6

Mali-400 build and usage of SMP code in preemptible code fixes.#6
hardkernel merged 2 commits intohardkernel:odroid-3.0.yfrom
rzk:odroid-3.0.y

rzk commented Jan 7, 2013

Uh oh!

hardkernel commented Jan 8, 2013

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

rzk commented Jan 7, 2013

Uh oh!

hardkernel commented Jan 8, 2013

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants